How to make a radio-controlled machine?

It is unlikely that anyone will deny the fact that the radio-controlled machine is the most interesting and appropriate gift for a child and many adult men. But it often happens that even expensive models are unreliable and show low speed. And even in this case there is a solution. In this article, we will look at ways to make a radio-controlled car in order to fully enjoy the control of a race car along the path you have planned.

to contents ↑

How to assemble a car on the radio?

So, for the self-assembly of a radio-controlled machine, you will need the following elements:

• a model of absolutely any car, you can use the simplest one, any production - from Chinese to domestic, from American to European;
• VAZ solenoids for opening doors, 12 volt battery;
• radio control equipment - AGC, but do not confuse it with Automatic gain control, because the abbreviation is exactly the same;
• batteries with chargers;
• radiator;
• electrical measuring units;
• a soldering iron with solder, as well as a bench tool;
• a piece of rubber, which is necessary in order to strengthen the bumper.

to contents ↑

An example of assembling a radio-controlled machine

Well, now let's move directly to the circuit, in other words, to the process of creating a high-quality model of the RU-machine:

1. Assemble the suspension at the very beginning - that's why we needed a basic model, as well as a 12 V battery.
2. After that, take the VAZ solenoids, plastic gears and assemble the gearbox.
3. On the body and the studs, cut the thread so that it can hang the solenoids and gears.
4. Now connect the gearbox to the power supply, be sure to check. If everything is in order with its functionality, install the gearbox directly into the machine.
5. Install a heat sink in order to protect the circuit from overheating. The radiator plate, by the way, can be quite reliably fixed using bolts.
6. After you install the radiator, install the radio control chips and the power driver.
7. After installing the chips, completely assemble the body of your car.

Now you can safely proceed to the test races of the car.

Important! DIY toys are always a great way to show your care and love for a child. If you welcome this approach, you will surely like our other ideas:

• How to sew a children's backpack with your own hands?
• DIY kitchen from plywood.
• DIY toy basket.
• DIY Pillows.

to contents ↑

Useful Tips

So, you have a radio-controlled machine in your arsenal. What needs to be done to make it more reliable and maneuverable?

Do not overload the model with unnecessary systems and parts. All sound signals, high beam, dipped headlights, doors that open - all this, by itself, looks pretty pretty, believable. Creating a car on the radio - the process is already quite difficult. It is not worth complicating it even more, because it can have a very negative effect on the main running indicators of your model.

The most important thing to concentrate on is to make a high-quality suspension, to ensure excellent signal transmission.Well, to improve maneuverability and optimize speed performance, the system refinement during the test runs will help you.

Important! Even the most interesting radio-controlled machine can not be the only hobby of a child for a long time. So that he does not get bored and learns with interest everything new, and you spend less on your nerves, correcting the consequences of leprosy of little crumbs, use the selection of our interesting ideas:

• What to do with a child?
• How to entertain a child at home?
• How to teach a child to draw?

to contents ↑

Stock footage

Now you can make a radio-controlled machine and enjoy the toy for as long as you have the excitement, because it is so exciting.