How to install channels on a satellite tuner?

Digital television allows us to enjoy watching our favorite movies and shows in excellent quality. Connectivity to the satellite gives even more options. A set-top box for satellite television is a fairly rational and good purchase. Such an interesting device would not hurt everyone. But after the purchase, many people ask the same question: how to install channels on a satellite tuner? In order to find the answer to this question, get to know this device more closely.

to contents ↑

Satellite box

The device is a special device that allows you to decode incoming data and transmit it to the image output device in the form with which it can work. Satellite receivers are simply huge today. This component is an integral part of the complex of equipment for watching satellite television.

Important! Which model is best for your region - check with a consultant in a profile store or on our website.

to contents ↑

What is required?

In order to install the channels on the tuner, you need to have the following devices at hand:

• TV itself.
• And the satellite receiver that you purchased.

If everything is ready and you are confident in your abilities, then it's time to hit into the settings details.

to contents ↑

Working process

As you already understood, no screwdrivers and hammers are needed, so we sit back in a chair more comfortably and proceed to set up:

• First you need to connect the receiver itself to the TV. To do this, use the appropriate available connector.
• You need to choose the most convenient TV channel on which this receiver will broadcast.
• Next, you need to add this channel to the device, for this you need to scan the desired transmitter at the selected frequency. Determine which channel you want to tune to begin with.

Important! The popular channel lookup table should help you with this. To find it, open your favorite browser and type in the “channel search table for satellite television” into the search bar. In the results, click on the desired link and determine with its help which channel your satellite is on.

• Then you need to go to the main menu of the device. There you will need to find the section that is related to the setting of transponders. The name of the model of your device also affects the process, since the name of the selected section depends on it.
• Now highlight and select the desired transmitter. After these steps, you need to scan the transponder and add all the channels to the receiver.

Important! Experienced users are advised in the future to conduct automatic analysis every two months.

• Select the receiver again in the main menu and use the “Scan” key. You will be offered one of four scanning modes - manual, automatic, network or blind.

Important! It’s best to set the view to “Automatic,” so as not to enter complex parameters manually. The gadget itself must find all the working transponders that are perceived by your satellite dish.

• The installation of channels on the tuner is almost done. You just have to find the desired channel and go to the equipment menu. There you will need to find and select an item called “Channel Editor”. From there, try to get into the “TV channel” and add the one you are viewing directly to the list.It is best to set the folder in which they will be displayed.
• It remains to press the “OK” button and save your changes.

to contents ↑

Stock footage

Congratulations, you yourself managed to cope with such a difficult equipment. If during the work you have any problems and questions, it is best to look for answers from the manufacturer or provider of TV services.