Clipper - DIY repair

The simplest models of haircuts are designed in much the same way as Soviet-style razors. The difference between them is that in modern models of machines a pendulum type vibrator is used, so the path of the blade is not horizontal, but arcuate. But even the most high-quality and reliable electrical appliance tends to break with time. Topic of the article: clipper - do-it-yourself repair.

to contents ↑

General principle of the device

The design of these devices does not differ in particular complexity, therefore, there are no special difficulties during repair. Here are the main components of such a device:

• Steel core transformer.
• Stator coils - 2 pcs.
• Cutting tool.
• Vibration mechanism.

As you can see, there is nothing complicated. If the breakdown is not very difficult, you may be able to cope with the problem yourself and do not have to contact the master.

Consider what it takes to fix a hair clipper. The most common reasons a device refuses to cut are as follows:

• Engine failure.
• Power supply problems.
• The knives are dull.

Important! In fact, if the knives are dull, the machine works, but does not cut, but simply tears the hair. All that needs to be done in this case is to imprison them.

to contents ↑

Instrument inspection

Before you begin to repair the device, carefully inspect it. The inspection procedure is as follows:

• Inspect the cord: is it damaged, is the plug pulled away. If there is damage, it is much easier and safer to replace the cord.
• Check the voltage at the block integrated in the housing.
• Ring switches and circuit breaker. If these parts fail, they must be replaced.

to contents ↑

How to repair a hair clipper: engine breakdown

The most common malfunction is the failure of the coils. There are 2 repair options: rewind or replace.

Important! Of course, it is easier to replace, but you need an absolutely identical coil with exactly the same number of turns that was originally in the unit. It may not be on sale.

Rewinding is a matter requiring patience, but feasible even for a student. Rewinding can be done with a drill or even manually. The biggest difficulty is not to make a mistake with the number of turns.

Important! A greater or lesser number of turns can adversely affect the power of the device.

As for power outages - believe me, in many cases the problem is not at all in the typewriter. If the device is running on battery power, then it is quite possible that the time has come to replace it. If the machine is networked, then the following options are possible:

• Make sure the apartment has light.
• Connect the appliance to a different outlet.
• Inspect the plug and cord. If necessary, replace them.

Important! After the repair is successfully completed, do not forget to adjust the position of the knives. To make the process faster and the result to be of high quality, use our hair clipper setup instructions.

to contents ↑

How to sharpen knives?

For sharpening you will need a special circle with an aluminum disc. The procedure in this case is as follows:

1. Wash and dry the surface on which you will sharpen the knives.
2. Pour abrasive onto the prepared surface, level it.
3. Put the knife strictly along the radius of the disk, clamp it in the clamp, and then start the circle.
4. Treat the knife with a special solution and lubricate.

Important! There are other ways to sharpen. Step-by-step master classes and useful recommendations for solving this particular problem can be found in a special article of our portal of useful tips. "How to sharpen the knives of a clipper?".

to contents ↑

Head adjustment

If the head is not configured correctly, the machine is working, but very poorly. Here are some things to check in this case:

• The amplitude of the knife.
• The location of the knives relative to each other. You can adjust them using a conventional screwdriver.
• Centering the blade unit cover.

Important! We must not forget about prevention. If the device has a simple device, then it will rarely break. This fully applies to clippers. But this does not mean that they do not require any care. You need to regularly clean and lubricate them.

If it turns out that the device cannot be repaired, do not rush to throw it away. In a separate publication, we presented some interesting ideas, what can be done from a hair clipper.

to contents ↑

Stock footage

As you can see, you don’t have to go to the store for a new device. With any malfunction, you can eliminate it on your own. You just need to understand the cause of the breakdown and set aside time to repair the clipper.