How to wash cement from the car without damaging the paint?

Small cement drops, regardless of the cause of their falling on the surface of the car, can be a significant problem for the car owner. In this article, we will share with you practical recommendations on how to wash cement from a machine as quickly and efficiently as possible. After hardening, particles of cement mortar are quite difficult to remove without damaging the coating. However, if you follow a certain algorithm, then you can do it even at home.

to contents ↑

How can liquid concrete be washed?

To remove stains from the surface of the car, you may need the following tools:

• special cleaning compounds;
• vinegar;
• lemon juice;
• electrolyte solution;
• water;
• car shampoo.

Important! In its structure, cement is an alkaline compound, and therefore any acidic medium is suitable for its dissolution and removal from the car. It is important only when cleaning drops of cement from the surface of the machine not to overdo it with the solvent and not to damage the paint covering the car.

to contents ↑

Chemicals

The simplest and most effective way to get rid of complex contaminants on the surface of the machine is to use chemicals with an acidic composition. Therefore, to clean the cement from the machine, the following methods will work.

Method number 1. Specialized tools

How can you quickly remove cement from a car? Specially designed cleaning compounds are sold in modern car centers to remove stubborn stains from the car. Sometimes these products are intended exclusively for the treatment of automotive surfaces, and sometimes you can use universal substances for cleaning ceramics and other surfaces.

The most popular is the product of the ATLAS TZOP trademark, which is designed both for cleaning tiles and for treating the surface of a car.

Use this cleaning composition according to the following algorithm:

1. Apply the chemical to hardened cement drops.
2. Leave the substance on the surface of the machine for several minutes.
3. Clean the surface with a regular cloth.

Method number 2. Electrolyte solution

Since almost any mild acid is suitable for washing cement from a machine, an electrolyte solution can also be useful to you, which must be used as follows:

1. To avoid damaging the varnish, dilute the chemical solution slightly before use.
2. Using a soft cloth, apply the solution to the surface of the dirt and rub gently.
3. Rinse with plain water.

Important! If after removing cement stains on the surface of the machine there are traces, then they can be removed using polish.

Method number 3. Car shampoo

An aggressive cleaning medium with high density foam will help to clean the surface of your car from cement and use the following instructions to achieve this:

1. Shampoo is poured into a bucket of water to clean the car from strong contaminants - the concentration should be 2 times higher than the instructions.
2. When the mixture has filled about a third of the bucket, cover it with a lid.
3. Place an air hose under the cover and turn on purge mode.
4. After 3-4 minutes, remove the cover - in front of you should be a dense foam.
5. Coat the surface of the machine with an even layer of foamed shampoo.
6. To achieve a good result, the foam should be on the surface of your car for 20-30 minutes, so when it settles, renew the layer of the substance.
7. After this period of time, wash with a strong pressure of water.

Important! If the car still has traces of cement, and accordingly - the desired result was not achieved, then you can repeat the procedure.

to contents ↑

Folk methods

The answer to the question of how to wash cement from a machine will help you find some simple, but at the same time, effective folk remedies:

Method number 1. Vinegar

In cities with existing cement plants, residents noticed that the machine can be cleaned by washing its surface with an ordinary 9% solution of acetic acid, which is found in almost every kitchen. In order to easily remove dirt from the paint, use vinegar as follows:

1. Using a sponge or soft cloth, apply a small amount of acetic acid to the set cement.
2. Wait 2-3 minutes.
3. Easily remove dirt with a soft, damp cloth.

Method number 2. Lemon juice

Acid is found in many fruits grown in orchards and sold in grocery stores. The simplest solution to how to wash the cement from the machine will be lemon juice:

1. Cut a small lemon lengthwise into two.
2. Lightly rub the area of ​​contamination.
3. Rinse off the acid with water, as a result - the cement must come off the surface.

Important! By the same principle, you can use an apple or a solution of citric acid.

Method number 3. Mechanical impact

If on the car body there are only small droplets of cement that look like sand, you can clean it out with a gentle tapping with a rubber hammer. To do this, remove the casing of the machine and with gentle movements tap on the inside, the frozen drops of mortar - they should crumble.

to contents ↑

Stock footage

In this article, we shared with you the most popular and effective ways of how to get rid of unpleasant building dirt on a car without damaging the top coat of paint. All of them have been repeatedly used by many motorists, so the effectiveness is beyond doubt. We sincerely hope that with the help of these recommendations you will be able to quickly and easily return your transport to its former purity and attractiveness.