DIY kitchen apron made of glass

The kitchen is the most visited room in the whole house. Everyone devotes quite a lot of time to interior design. Today we will talk about such a part of the wall surface as an apron. There are many different solutions to this surface. However, the use of glass to decorate this part of the kitchen deserves special attention. Today we will discuss how to make an apron for a kitchen from glass with our own hands.

to contents ↑

The advantages of glass products

Before solving the problem of how to install a glass apron in the kitchen with your own hands, it is necessary to highlight the main advantages and disadvantages.

Advantages:

1. The panels are easy to clean, wash, and it is also difficult to damage them mechanically.
2. It is possible to use various chemicals with active acids. The condition of the material will not deteriorate and will not change in any way.
3. Glass is a very affordable option for a beautiful decor at home.
4. The material is hygienic, practical, not afraid of water, fat and dirt, which often form on similar products from another material, are not absorbed into it.
5. Aprons for a kitchen made of glass with your own hands can be made without joints or from large surfaces that are fastened together. In this case, you will have small gaps.
6. Beautiful aesthetic appearance.
7. A transparent product on the wall is very easy to install. You will not need to make furniture to install this element of the interior.
8. No need to pre-align the walls.
9. Finishing can be done in any design style and apply a different pattern, which only you wish.

Minuses

If you decide to make a glass apron for the kitchen with your own hands, then you should consider some of the disadvantages of this material:

• For installation, drilled holes are used, which must be done before you hook the glass panel on the wall. When a transparent and fragile panel is already attached, it is impossible to drill a hole.
• Another small drawback is that such coatings are very popular and this is not an innovation among design solutions. That is, you may have a unique picture, design, but the working surface of this material is quite common. Therefore, if you want to have an individual interior, perhaps it is worth looking at another option.

to contents ↑

Choosing quality material

Before you install a glass apron in the kitchen with your own hands, you need to know all the recommendations regarding the purchase of this product:

• For wall decoration, panels are used with a thickness of 7 to 9 millimeters.
• The panels are made of tempered glass. Compared to an ordinary surface, transparent is several times stronger and better in all respects.

Important! The main feature of the glass finish is that it can be used next to the hob and not be afraid that it might burst.

Recommendations:

• Despite the fact that this decor option is suitable for different interiors, transparent panels are best used in the design of Hi-tech, Loft or Minimalism. If you are designing a kitchen in a classic interior, then give preference to hardened matte material.
• Depending on what you want - to increase the space in the horizontal axis or vertical, you can choose a picture. So, a vertical image will make the room taller, and horizontal stripes “stretch” the surface in breadth.
• Deepening under the sockets must be done before you mounted the glass panel.
• To illuminate this type of panels, linear and LED light sources are used. When lighting this part of the room, it should be borne in mind that the matte surface reflects less, light rather than glossy.
• The installation of this material can be left to the last stages of repair, since it does not require the release of space from other furniture. During installation, not a single gram of dust and debris is formed.

to contents ↑

Varieties of glass panels

Regardless of how large your kitchen is, all aprons made of transparent material visually increase the space. Glossy products reflect light to a greater extent and additionally illuminate the room.

Kinds:

• The most inconspicuous and colorless models are transparent panels. They protect the wall with paper products or painting from greasy splashes and stains.

Important! In this case, preference is given to transparent or frosted glass. This also includes panels with silkscreen elements or textured surfaces.

• Skinali panels are surfaces decorated with photo printing. The essence of the coating is that the image is applied to the back of the surface using special technologies and the use of ultraviolet ink.
• Solid paint on tempered glass. The essence of the method is that any color is applied to the panel, after which heat treatment takes place.
• One of the most affordable options is to use a vinyl film. In this case, the pattern is attached to the glass or rolled onto a surface inside the material.
• Triplex is a multilayer material that consists of two or three interconnected plates, between which there is a pattern.
• The use of mirror panels allows you to visually increase the space several times.

Based on a large number of varieties and types of stoves, you can choose and install an apron for a kitchen made of glass with your own hands.

to contents ↑

We install a glass apron with our own hands

Such plates are mounted on the wall with the help of special parts designed for this purpose, and means based on silicone. During installation, joints are sealed between the panels and the countertop.

To fix all surfaces you will need a special hole made in advance. The size of the fasteners is two centimeters.

Important! We draw your attention to the fact that when choosing glass panels for finishing a kitchen, you get rid of uneven walls.

Preparatory phase before installing the apron

Before installing the glass surface:

• Make sure that the working surface does not have any protruding elements and cannot damage the glass.
• You should double-check that the size of the panel matches the connector.
• All openings should be symmetrical relative to each other and have a diameter slightly larger than the fasteners.
• The calculation of fasteners should be based on the fact that at least four special hardware is needed per square meter.

Important! If there are electrical outlets or switches on the wall that serves as an apron, they should remove the top cover.

Work surface illumination

An additional element of decor when making a glass apron for a kitchen with their own hands is lighting. So, around the perimeter it is recommended to use LED strip, which serves as an additional light for the panels and a light source for the countertop working surface.

Mounting

Installing a transparent product is the final step in your repair.At the time of installation of the panels made of transparent material, you should already have all the plumbing installed in the kitchen, there should be sockets and furniture should be arranged.

At the initial stage, it is necessary to attach the plate blank to the wall and mark the places of drilling. After that, the surface is attached using dowels. Installation takes a little time. After installation, it is necessary to remove the protective film that is attached to the glass.

Important! The final step is to attach the “caps” that can come with the panels. At this stage, it is also worth putting the disassembled sockets in place.

to contents ↑

Panel Maintenance Rules

An apron for a kitchen made of glass with your own hands does not require special care. All contaminants can be washed with soap and water. Of course, it is recommended to wash with glass products.

Important! It is forbidden to use abrasive substances for washing glass panels.

to contents ↑

Stock footage

We have figured out how to make a glass apron for the kitchen with our own hands. This is a completely budget option, which will please the owners for quite some time. If you are looking for a universal solution for the kitchen, panels made of transparent material will become an indispensable way of decorating the room.