Fungus in the bathroom on the sealant - how to remove?

Silicone sealant is a very important, indispensable component when equipping a room with plumbing fixtures, it is also needed when carrying out various types of work. The sealant forms a layer that can withstand the threat of a temperature drop or aggressive detergents. There are sealants (sanitary silicone) containing in their composition additives called “fungicidal”, which protect the surface from mold and fungus. And here the mold itself and fungi are a very common problem in an airtight bathroom. Below, you will find useful tips on the topic: fungus in the bathroom with sealant - how to remove?

to contents ↑

Causes

The main reason is the large amount of humid air in the room. Contributing factors may include:

• poor ventilation system;
• non-insulated walls;
• lack of good sealing of the joints between the panels.

Perhaps you have a hermetic coating with a fungicide additive, but the mold still made its way? Then you should think about the quality of the product. Another option is also possible: for example, during work, someone cheated and made some mistakes or tried poorly to provide you with a quality result.

The reasons that the fungus wound up in the bathroom on the sealant are a lot. How to remove it and prevent the resumption of colonies - this is what should certainly interest you. Otherwise, harmful spores will soon not only spread across the entire surface of the bathroom, but also penetrate your body.

to contents ↑

Mold damage

Mold can both help a person and harm. If you find the first signs of mold - act immediately.

Mold is spread by spores - these are microscopic particles that fly around in the air and settle in other places where their new nucleation can begin.

They harm our airways, organs of the nasopharynx, digestive system and other vital systems of the body.

Important! A fungus is very dangerous for people with low immunity and allergies.

to contents ↑

We remove the mold

If you need to remove mold in the bathroom from the sealant, there are many means for this. Therefore, do not despair and look for a new place of residence - arm yourself with one of the following means, and act.

Method 1

One of the simplest and safest options:

1. In a small container, mix water and any bath cleaner.
2. Wet the sponge and wipe the contaminated area.
3. Thoroughly wash off mold from the surface.

Next, it is necessary to disinfect the problem area so that invisible spores do not continue to spread:

1. Take, for example, bleach based on chlorine - the usual “Whiteness” is quite suitable.
2. Apply, leave for 15 minutes (if you do not have so much time, you can not wait).
3. Before rinsing, rub well into the sealant so that everything is perfectly absorbed.
4. Wash off, wipe dry.

Substances with a chlorine content have good reviews regarding the control of fungus in the bathroom on sealant and other surfaces. You can apply in this way:

1. Bred in a ratio of 1: 1.
2. Next, spray to the surface.
3. You can not rinse a couple of hours, but it’s good to ventilate the room.

Important! The problem is that the treated area may turn yellow - you will have to come to terms with it if you use such a tool and be prepared for a similar result.

Method 2

Try to treat the sealant with a specialized chemical product aimed at destroying the fungus, and not at all for its prevention. For example, the Neomid 600 has proven its worth.

Method 3

Another simple and cheap tool to remove the fungus in the bathroom on the sealant:

1. For 4 parts of water, 2 parts of detergent and ammonia.
2. We are waiting for about half an hour - you need to let the tool soak.
3. Wash thoroughly with a brush.

Method 4

Borax Removal:

1. We dissolve in water - the ratio of 1 cup to 2.5 liters of water.
2. Wet the old toothbrush and thoroughly clean the place of contamination.
3. Later, wipe with a dry soft cloth.

Important! It is undesirable to wash off the solution, because it forms a protective layer against mold.

Method 5

There is probably white table vinegar in every home. In this case, it is useful to you to remove the fungus in the bathroom with sealant:

1. We spray the problematic ones with undiluted vinegar through a spray bottle.
2. After 60 minutes, rinse with a sponge dipped in water.
3. It may be necessary to repeat the procedure the next day.
4. Do not forget to ventilate the room, as vinegar has a pungent smell and its fumes adversely affect our health.

Important! Be careful, as vinegar is an acid that can corrode some types of sealing putty. As a result, you can get rid of not only mold, but also of the sealant itself. It’s better to use this remedy (as a regular prevention, too) on the tile.

Method 6

Hydrogen peroxide is an excellent antiseptic that will fulfill its direct function - to fight fungi:

1. Hydroperite is applied to the sealant in undiluted state.
2. After a couple of minutes, wipe the sealant with a soft sponge or rag.

Method 7

Baking soda is another agent that is always present on the farm, which also gives a cleaning and disinfecting effect. For its use in order to remove mold in the bathroom from the sealant:

1. We dilute in the ratio of half a tablespoon to 250 ml of warm water.
2. Rub with a stiff brush, then rinse.
3. In order to consolidate the effect, repeat the procedure.

Method 8

If suddenly the mold was under the tile:

1. It is necessary to open the tile joints using a rasp or electrophoresis.
2. We clean the seams, gloss over with an antifungal additive.
3. Grout again.

Method 9

Tea tree oil or other essential oils:

1. Mix one teaspoon in a glass of water.
2. Next, you need to go through the mixture to the contaminated area.
3. Rinse off is not necessary - the smell will pass through a couple of days.

Important! Essential oils, in particular tea tree, have an antifungal, antiseptic effect, and therefore help in the fight against mold.

to contents ↑

What else can I use?

Here is a small list of tools that will help you:

• ammonia;
• copper sulfate;
• boric acid;
• antifungal spray;
• antifungicides.

to contents ↑

Mold is back!

In some cases, the mold returns, and to the same place. The reason is that the root of the problem, in fact, comes from under the sealant. So - you have to delete it:

• In our hands we take something sharp and thin, for example, a knife.
• Carefully cut the layer along the upper and lower edges of the seam.
• Having picked up, we take out sealant from a seam.
• Feel free to throw it away, as mold spores are firmly seated there.
• If you find dirt inside the seam, that is most likely cleaned with a knife.
• Disinfect the seam with isopropyl alcohol - pour it, wait 20-30 minutes.
• Then we moisten the seam with a soft rag with an antibacterial agent (we do not use the bath for a day).
• We apply a sealing layer - this time, preferably with the addition of a fungicide, which prevents the formation of mold.
• In order for the sealant layer to dry completely, we wait another day.

That's it, your bath is sanitized and looks like new! Now you know how to remove the fungus in the bathroom on the sealant.

to contents ↑

Prophylactic agents

In order to continue to forget about mold forever, you need to be puzzled by a few more points:

• Good quality ventilation system. In addition to her, do not forget to leave the door ajar - the ventilation system is certainly good, but it can not cope without an influx of air from outside.
• We eliminate all sources that support moisture. So for example: a dripping tap, condensate on the toilet bowl.
• Cracking up. Any crack, whether it is on the ceiling or floor, contributes to the penetration of mold, even from other apartments.

to contents ↑

Stock footage

Well, that's basically all you need to know to protect yourself from mold. The main thing is compliance with preventive rules, then the fungus will not appear. But if nevertheless this happened, then apply the above methods to remove the fungus in the bathroom on the sealant. Do not forget that mold harms your health and this is the most important thing - do not skimp somewhere to spend money, because health is above all!