How to glue wallpaper in the corners?
If you decide to carry out repair work yourself, then prepare for the fact that you have to face one fairly important process, which will have to be given a lot of time and effort. In particular, the case relates to wallpapering the walls. In principle, this work can be done independently, but difficulties arise when it comes to decorating corners. Owners of both old and new apartments face bumps in these areas. Today we will tell you how to glue the wallpaper in the corners correctly in order to get out of this situation with the least loss.
to contents ↑How to paste inside corners?
It is very important to understand how to properly glue wallpaper in the corners, because in any standard room there are at least four of them.
Important! If this is your first time encountering this work, it is best to start from the least visible places.
Features gluing internal joints:
- To achieve a good result, it is recommended to glue the wallpaper so that the canvas comes on the adjacent surface by at least 3 cm. Otherwise, it is likely to peel off after drying.
Important! If you go more than 5 cm, then the adjacent strip is wrinkled.
- The rotation and bending of the wallpaper on an adjacent plane should be well lubricated with glue, strongly pressing the canvas to securely fix it.
- The algorithm of work itself is quite simple: it is necessary to measure the width of the canvas located on an adjacent wall, more often it is 53 cm.
- Marks for allowances for glued strips are recommended to be fixed at a distance of 2 cm from the corner, then a vertical line is drawn using a plumb line. This mark will become the edge of the glued web.
How to make the outer corners?
The information regarding gluing the external joints with wallpaper if the room has various protrusions on the walls or niches will definitely come in handy for you. There are two ways to perform such work:
- First option. First you need to make sure that the work surface has a smooth texture, it does not need to be evened out and putty applied. The canvas must be applied to this place, then using the level to measure the edge of the strip, so that all subsequent canvases are glued evenly.
- The second option. First, the strip starts at an angle of 4-5 cm, the next strip is glued with an overlap. Using a ruler with a paper knife, two layers of material are cut vertically.
How to decorate joints with vinyl paintings?
Today, vinyl wallpapers are very popular, so many are interested in how to glue wallpapers in the corners of a room of such a plan. To understand, you need to know what characteristics this type of material has, it can include the following:
- In order to glue any surfaces with vinyl wallpaper, they must first be leveled to the ideal state.
Important! If you ignore this requirement, then sticking vinyl products will become completely pointless, because any unevenness will definitely lead to peeling of paintings from the walls.
- When working with this material at the joints of the walls, you can not bend the vinyl panel.
- It is not recommended to combine two solid vinyls in one corner. Ideal - sticking with an overlap of 3-5 cm continuous strip.
How to glue non-woven wallpaper at the joints?
How to glue wallpaper in uneven corners if you prefer a material such as non-woven? Everything, in fact, is simple, the following recommendations must be observed:
- In order to paste over the inner corner with non-woven fabric, it is necessary to cut off the canvas coming into it with an allowance of 1-1.5 cm - it should overlap the adjacent wall.
- In order for the canvases to fit more tightly, it is better to make small cuts along the entire length every 4-5 cm along the edges, in the process of work, press them tightly against the walls.
- It is necessary to start gluing the adjacent wall from the opposite angle, and after gluing all the strips, the latter should be cut off with a small overlap of 2-3 mm and then glued with an overlap.
Important! Make sure that the strips adjacent to the joints are cut so that the distance between the corner and the seam is 1.5-2 cm, which is then wrapped.
- It is necessary to make cuts along the edges, to glue subsequent strips on top, laying these edges at an angle.
How to glue wallpaper with drawings at the junction of the walls?
Of course, the easiest way to work with canvases without patterns, but they look in most cases not so interesting. Therefore, a logical question arises, how to glue wallpaper with a picture in the corners. It is necessary to think over everything in advance, because every factor that is of great importance has to be taken into account, it concerns the unevenness of the walls, which greatly affect the final result.
Important! If your walls are uneven, it is better to abandon the use of paintings with a vertical pattern, since they only emphasize the curvature of the walls.
Follow these rules:
- Refuse to buy paintings with drawings in the form of huge flowers or too small details.
- Do not rush to cut the wallpaper anyhow into strips of the desired height. It is better to spend more time, first match the patterns, and only then start cutting.
- In order not to violate the integrity of the picture at the joints, try to adjust the strip next from the corner, cut to the picture.
The logical completeness of the repair work directly depends on how beautifully and accurately you decorate the walls.
to contents ↑How to glue wallpaper in uneven corners?
If you did not use special perforated parts when aligning the walls, then you will definitely have problems with the wallpaper design of these sections. Do not forget that there are certain methods and features, how to glue wallpaper in crooked corners.
In order not to encounter serious problems in the future, follow this instruction:
- Apply special glue to the wall first. Do this in order to increase the level of adhesion of the canvas with the wall.
- Do not stick a whole piece of wallpaper at the junction, otherwise - bends, bumps, folds, bubbles will appear, as a result - the canvas will simply be damaged. Better overlap two pieces.
- Measure the wall that you plan to paste over with a strip at the corner for joining. Transfer the measurements to the canvas, then cut the desired piece.
- Lubricate the wall with another layer of glue, attach a strip to the wall. Smooth it with a foam roller in the direction from the wall to the joint. Then smooth the lap around the corner.
- On the other side, overlap the next strip, aligning the pattern or pattern.
Stock footage
Now you know how to glue wallpaper on the outer corners, how to properly combine drawings and work with uneven walls. Be especially careful that everything fits together clearly, there are no protrusions and gaps left!
(No ratings yet)
Loading...
