How to set up a webcam on a computer?

A device such as a webcam allows us to communicate via video over the Internet. Every day a small digital webcam is becoming more popular, many consumers use the device for shooting video and chatting with friends in video chat mode. Companies use these devices for video conferencing or simple daily communication with customers. Modern webcams do not require much effort to install, and today we will tell you how to configure a webcam on a computer. Believe me, even a person who is poorly versed in modern technologies can connect a device.

to contents ↑

How to connect a webcam?

How can an inexperienced user turn on webcams on a computer with windows 7? Today, a fairly large number of laptops have an already built-in webcam, and the equipment itself carries out its configuration. If it is not built into the computer, then you can install a web camera in the following ways:

• Using grips if the LCD monitor is narrow.
• Put on the table or under the monitor, if the webcam with a platform or leg.

Important! Regardless of the installation method, all gadgets are connected via a cord to the USB input.

Installation sequence

Most webcams are switched automatically when connected. And for the operating system to see a new device, you need to install a special program.

Detailed instructions for connecting and configuring the device:

1. Read the instruction manual carefully. It may indicate what needs to be done first: install the software, and then connect the webcam, or vice versa.
2. Connect the camera via the USB port to the computer. As a rule, the necessary connector is located at the rear of the system unit. On laptops, the USB port can be located on the side or front.
3. Wait for the automatic software installation to begin. If this does not happen, then the system may suggest searching for a driver on the Internet. From now on, the basic functions of the switched fixture should be available.
4. Insert the installation disc into the CD-ROM. The installer window should appear. Download the program from the disc that came with your webcam, just like a regular program. Follow the prompts of the setup wizard until the download of the webcam program files to the computer is complete.

Important! If you wish, you can additionally put various programs for working with the device. Open “Start” - “Programs”. In the application that opens, configure various webcam parameters: width, height, brightness, quality.

5. If you performed all the driver installation manipulations correctly, then when you open the “My Computer” window, you can see the connected device.

to contents ↑

How to connect a webcam to a PC without a disk?

If the device was purchased without a disk, then the necessary software can be downloaded on the Internet:

1. Look at the manufacturer’s company and the name of the selected model.
2. Go to the manufacturer’s website.
3. Find the driver for your device model on the official website.
4. Download the program.
5. Run the downloaded file. The installer window will open.
6. Perform the same manipulations as described above.
7. After installing the downloaded drivers, restart the computer.

Important! To find a driver for your model, you can enter the device identification number on the manufacturer’s official website.

In the “Device Manager”, find the camcorder, an exclamation mark will appear next to it, since it does not have a driver. Right-click on the device name and go to “Properties”. Go to the “Details” tab and select “Hardware ID”. Use the first line as the name of the device and enter in the search engine.

Found by software identification code download:

• If there was no disk to the camera, then you can download the driver pack. This is a set of different drivers for different devices. Look for the driver for your model in the driver pack.
• If your model is able to work without a driver, then connect the camera to the computer and start working with it.
• If there is no software, then in the device manager, select the item “Update drivers” and click “Automatic driver search”.

Important! All these manipulations must be performed after physically connecting the webcam to the computer.

to contents ↑

How to install the camera on a computer in Skype?

To configure a webcam on a computer on Skype, proceed as follows:

1. Run the skype program.
2. Log in to your account.
3. Go to the “Tools” tab.
4. Select “Settings”.
5. In the “General” section, go to the “Video Settings” item.
6. The image from the camcorder will appear in a separate window.
7. Position the webcam so that it captures your face.
8. Test your microphone and webcam. Set the parameters you need.

to contents ↑

How to set up a camera on a laptop?

Almost all laptop models have a built-in camera. The operating system automatically finds software for the device. If, nevertheless, the webcam does not work, then install the software through the disk that is included with the laptop.

Advice:

• Some laptops have a function to turn the device on and off. Therefore, if the device does not work, then check the power button: press Fn to activate it.
• Never touch the webcam lens with your hands if you want it to work efficiently.

to contents ↑

Stock footage

We hope that our recommendations have helped you install and configure a web camera on your computer, and now you can safely communicate with friends and acquaintances in different servers.