How to clean the teapot from the stainless steel outside?

Even the cleanest housewife is faced with the question of how to clean a kettle from a stainless steel inside and out. With prolonged and active use, it loses its shine, becomes greasy, scum, rust and carbon deposits may appear. In order for the stainless steel to please its appearance for a long time and not be covered with scratches, a special approach to its cleaning is needed, especially if electric kettle. Today, housewives, proven over the centuries, come to the aid of housewives and household chemicals, presented in a wide assortment.

to contents ↑

What can be used to clean a stainless steel kettle?

Not every product can handle stainless steel. Here is a list of the “helpers” who have proven themselves in this business, who are available to everyone:

• salt;
• vinegar;
• soda;
• laundry soap;
• Toothpaste;
• chemical agents.

Also useful:

• hard sponge (not metal);
• deep capacity;
• soft toothbrush;
• towel.

With this kit, you will be able to remove any dirt, because in the vast majority of affordable and effective methods of cleaning stainless steel, these components are used in different combinations.

to contents ↑

How to clean the teapot from the stainless steel outside?

There are several ways to wash carbon deposits from a stainless steel kettle from the outside. Here are a few of them.

Important! Boiling methods are only suitable for non-electric kettles.

Option 1

If the pollution is small, use a mixture of water and salt (at the rate of 1 tablespoon per 1 liter of water):

1. Dip the kettle in a container with the mixture, boil on fire for 30 minutes.
2. Allow to cool completely.
3. Thoroughly clean the remaining dirt with a sponge, which is recommended to moisten with a solution of laundry soap.
4. Finally, rinse thoroughly with running water and wipe dry with a towel.

Important! Instead of salt, you can use baking soda.

Option 2

Much faster - boiling in a composition of 9% vinegar and soda. The sequence of actions and proportions are the same, the difference is only in the time of boiling - 5-10 minutes are enough.

Important! The teapot must be completely immersed in water, otherwise it will not be possible to clean it qualitatively.

Option 3

If scale has formed on the outside of the electric kettle, moisten a cotton wool or cloth in a solution of citric acid and apply to scale deposits. They will disappear gradually. Wash well with water and wipe dry.

Option 4

To remove traces of soot:

1. Pour water into a large saucepan, dissolve a mixture of 100 grams of laundry soap (or 80 grams of silicate glue) and 100 grams of soda.
2. Dip the kettle in a pan and boil.
3. When the water has cooled, remove and wash with a sponge.

Option 5

Another sure means with which you can wash the kettle from stainless steel from fat outside is baking soda. In order not to scratch the surface of the kettle:

1. Mix two teaspoons of soda with a few drops of water.
2. You get the mass that needs to be applied to the pollution.
3. After 30 minutes, rinse with water.

 

 

Important! If the dirt is old, the product must be kept longer.

Option 6

Rusty stains can occur both inside and outside the metal kettle. This is due to iron impurities found in tap water in some regions. A mixture of soda and vinegar (one to one), as well as citric acid, will perfectly cope with rust:

1. The active ingredient should be diluted with water, optimally - 1 tablespoon per liter of water.
2. Apply to stain, then wash as usual.

Important! Remember that metal brushes damage the surface.

to contents ↑

How else to clean the kettle from the outside of scale and fat?

If you are interested in what else to wash the kettle from stainless steel from the outside of fat, use the following effective methods:

• The simplest thing is to remove it from where drops of oil and fat can get on it. It’s best to think of a permanent clean place.

Important! The sooner the fat is removed from the surface, the better and easier, because after a couple of days a small drop will already hold firmly and become solid. Under the influence of high temperature, brown stains are formed, which are more difficult to deal with.

• To remove small greasy droplets, heat the kettle, wipe it with a soft cloth, previously moistened in a solution based on laundry soap. It is very easy to prepare the solution - grate the soap and pour 1 tablespoon of the resulting chips with hot water (1 cup). The liquid will be ready when the soap dissolves. It will help in the event that drops of fat are large and hold firmly. Apply the solution liberally to the dirt, leave for 20 minutes. Rinse with warm water afterwards.
• If the greasy spots are firmly fixed, generously cover with soapy foam. After 20 minutes, rinse with warm water, pressing with a sponge in places of accumulation of dirt. Repeat if necessary.

Important! This method allows you to perfectly maintain polishing.

• Another great option is toothpaste. Apply it to a soft toothbrush and remove stains.
• To wash the kettle from the stainless steel outside of the fat, when it is thoroughly smoked, mix in equal proportions salt, soda and 9% vinegar. Mix thoroughly, apply on a sponge, wipe the problem areas. Rinse with water and dry with a towel.

to contents ↑

How to clean the kettle inside?

There are some very simple and affordable tools that will help clean the kettle from the stainless steel inside. From the options below, you can choose what you have available right now, or what you prefer to use.

Vinegar

Dissolve the table or apple (acts gentler) with water (one to nine), pour into a teapot and boil. Take a peek inside. When the scum begins to depart, remove from heat, wait until it is completely separated.

Important! To prevent scale formation, drain the kettle overnight.

Citric acid (in powder)

For a teapot with a volume of one and a half liters or less, pour the contents of 1 sachet to the bottom and boil.

Important! It will be equally effective to simply leave the dissolved acid in the kettle for several hours.

Lemon

Cut the fruit into 4 parts, fill with water and boil for 10 minutes.

Important! Potato peelings, drenched in water for several hours, are also suitable.

Soda

For a medium-sized teapot, it will be enough to dilute 1 tablespoon of soda, boil for about half an hour.

3 in 1

It is worth using if after using the remaining options the scale is still left. Alternately clean with soda, citric acid and vinegar. After applying this method, it is more unlikely that the question arises of how to remove scale in a teapot from a stainless steel.

Carbonated drinks

For example, Sprite contains acids that quickly dissolve scale. Pour liquid into the kettle. If the scale does not go away, boil.

Important! “Fanta” and “Cola” will also do just fine, but they can paint the surface.

Brine

Pour into a kettle, boil.

Important! Cucumber pickle is also effective against rust.

Decalcifier

Present in a variety of store descaling products. For example, Cif has proven itself well. Carefully read the instructions for use and be careful during use. As a rule, such products cannot be dissolved in hot water or boiling water, they are mixed with cold water.

Important! After cleaning in any way, rinse the kettle thoroughly with water and boil clean water to completely remove foreign substances.

to contents ↑

Stock footage

We hope that the tips given here on how to descale the inside of the kettle and the outside, as well as other impurities, will be useful for you, and you can easily maintain the cleanliness of your dishes by receiving tasty, aromatic drinks without flakes of rust or scale in return.