How to clean fur on white shoes?

Boots with fur turned outward look beautiful and stylish, but only until the fur starts to change color or spots appear on it. This is especially true of white fur - it is quite difficult to clean it, and it can lose its snow-white appearance quickly. It is difficult to remove heavy contaminants at home - it is better to entrust this matter to dry cleaning professionals. But not difficult pollution can be dealt with with improvised means. How to clean the natural edge of the shoe - white or another color, to remove the smell that may appear in shoes after daily wear of shoes not only on the street, but also in the office, shops? There are several simple ways how to clean the balloon boots and bleach the fur on them.

to contents ↑

Soda

Cleans white fur soda well:

  1. It should be rubbed into the fur until the soda absorbs all the dirt and darkens.
  2. Shake off dirty soda, and if dirt remains, add a new portion of powder.

Important! This method will help to refresh the fur and remove greasy stains, but soda can not cope with strong impurities.

to contents ↑

Starch, talc, semolina or flour

You can refresh and clean the fur on the shoes, as well as remove all unpleasant odors using potato starch, flour, talcum powder or semolina finely ground:

  1. To improve the effect, it is advisable to warm them up a little before use. This can be done in a pan, just do not burn the powder.
  2. One of the selected means you need to fill up the contaminated area, rub the product into the fur, and then shake off.

The powder absorbs dirt, dust and odors.

to contents ↑

Hydrogen peroxide

How to clean and wash white fur on boots? You can use a universal tool that always comes to the aid in difficult times - hydrogen peroxide:

  1. In 500 ml of water add 10 ml of hydrogen peroxide.
  2. Pour the solution into the spray bottle and spray the fur.
  3. After the fur dries, comb it with a comb.

The procedure is best done in the fresh air.

Important! Before spraying, the shoes themselves are better covered with polyethylene, otherwise - they may remain stained.

to contents ↑

Soda and alcohol

This tool will help if you need to clean the fur inside the shoe and remove the smell of sweat and mold from it:

  1. Mix 300 ml of water, 15 grams of soda and 5 ml of alcohol.
  2. Treat this mixture with fur.
  3. Dry it in the fresh air and then comb it with a brush.

Important! Sometimes discoloration of materials on boots and boots can cause improper storage. Read about how to store winter shoes in the summer.

to contents ↑

Shampoo for animals

Faux fur can be cleaned with animal shampoo as follows:

  1. Dilute 1 teaspoon of shampoo in warm water.
  2. Take a clean soft cloth, soak in the mixture and wring out. The material must be wet.
  3. Treat the pile with a damp cloth.
  4. Wipe it with a dry cloth, allow to dry in the fresh air.
to contents ↑

Sawdust

Contaminated white fur is well cleaned with sawdust soaked in gasoline.

Important! Sawdust can be purchased at the pet store. For this purpose, it is recommended to use hardwood sawdust, for example, needles.Gasoline must be used refined, which is sold for refueling lighters and other needs.

These tools are used in pairs as follows:

  1. Pour the sawdust with gasoline and leave it for a while so that it is well saturated.
  2. Rub the sawdust into the fur with your hands. Remember to wear gloves to protect your hands.
  3. Leave it for a while until they are completely dry.
  4. When the sawdust dry, it will not be difficult to shake them. The fur must then be combed with a brush.
to contents ↑

Potato starch, refined gasoline, burnt magnesia

If your beautiful white fur has turned yellow, you can use heavy artillery. We will prepare a special composition:

  1. Combine potato starch, refined gasoline, and burnt magnesia.
  2. Thoroughly mix all components until smooth.
  3. Sponge the mixture with movements against the growth of the pile.
  4. Leave to dry completely.
  5. When the composition dries, shake the fur well to remove any remaining cleaning agent.
  6. Comb the fur with a brush.
to contents ↑

Wheat and rye bran

In the fight against yellowness, all means are good; wheat or rye bran may come in handy:

  1. Preheat the bran in a pan. At the same time, they must be constantly stirred so that they do not burn.
  2. Spread the warm bran over the fur and rub it into the pile with massage movements.
  3. Shake the fur, and then comb it with a brush.
to contents ↑

Vinegar

One of the most effective ways to clean fur on boots is vinegar:

  1. In 200 g of water, dissolve 1 tablespoon of vinegar essence.
  2. Dampen a rag in this solution and wring it out.
  3. Work on soiled areas with a damp cloth.
  4. Leave the product to dry at room temperature.
  5. When the fur is completely dry, comb it with a brush.

Important! Vinegar perfectly neutralizes any odors, so at the same time it removes stains from the edge of the shoes, and the amber of sweat or musty.

to contents ↑

Machine wash

There are times when shoes are so dirty both outside and inside that local stain removal or dry cleaning can no longer be done. But because of this, do not send the shoes to the scrap, if on the whole they are still strong and quite comfortable.

How to clean the fur inside the shoe? The easiest option is to wash it in a washing machine. Of course, not every shoe will stand it, and if you are not sure about the quality of your shoes, then you should not risk it. But if you decide to wash your shoes in this way, then you should use the following recommendations:

  • Before starting the wash, shoes need to be prepared. Take out the insoles, laces and fasten the zippers, buttons, Velcro, if any.
  • Wash out the soles of dirt and stuck small stones.
  • Put your shoes in a washcloth, cloth bag, or just in an old pillowcase. This will improve the quality of washing, especially if there are a lot of metal inserts on the shoe.
  • Put a program for washing shoes, if any. If there is no special program, select the shortest one. The temperature should not exceed 30 degrees.
  • It is better to turn off the spin so as not to deform the shoes.

Important! Do not turn on the drying mode. High temperatures can permanently ruin shoes.

  • Pour the powder as usual, in proportion to the volume of your shoes or ¼ less - depends on how confident you are in the effectiveness of the product.

To wash the shoes correctly is only half the trouble, you need to dry it properly too:

  1. Drying your shoes is best in the fresh air, for example, on the balcony.
  2. Do not expose shoes to dry in the sun.
  3. Do not place shoes near or on radiators or heaters.
  4. It is best to stuff your shoes tightly with newspapers or white paper and leave to dry. Paper will help maintain the shape of the product and absorb water. Periodically, the paper needs to be changed. Then the drying will be faster.

Important! If you like to experiment with different images and for this you have many pairs of shoes, sandals, boots, a sneaker, there is already absolutely not enough space in the closet, you need to solve this problem. Read about Is it possible to store shoes on the balcony in winter.

to contents ↑

Stock footage

Do not abuse the frequent washings, otherwise - even the strongest and most reliable shoes can not stand and fall apart. And there are plenty of dry ways to clean the fur on shoes, even if it is bright white. All that is required of you is that you carefully monitor the condition of your shoes, then they will remain beautiful longer and strong, warm.

1 star2 Stars3 stars4 stars5 stars (No ratings yet)
Loading...

Report typo

Text to be sent to our editors:

Adblock detector

Wardrobe

Electronics

Wash