How to clean gold with vinegar?

Gold jewelry can captivate with its noble splendor, attract attention with incredible radiance. If there are still precious stones shimmering and sparkling in the light, like rain spray against a summer rainbow, then from this magnificence it is simply impossible to take your eyes off. But every product, even the highest quality, sooner or later begins to fade. The dust deposited on it in the street is mixed with sweat, secreted by subcutaneous fat, as a result of which the dirt formed strongly spoils the gold externally. In addition, gold jewelry in its composition have copper and silver, giving them strength, the necessary shades, which tend to oxidize and darken under the influence of air, water and time. In this article we will consider the most popular ways to clean gold with vinegar, ammonia, ammonia and soda at home.

to contents ↑

Why is gold polluted?

There are many reasons provoked by certain factors, due to which, in fact, a dark coating forms on gold, it loses its luster and natural beauty. The main pollution criteria:

• The metals that make up the gold alloy are oxidized, and then this oxide appears on the surface of the products with dark spots.
• Human skin constantly secretes special fat from the sebaceous glands, softening its upper layers. So, when particles of this substance fall on the surface of jewelry, they simply pollute it.
• Residents of the city are constantly exposed to urban dust, noise and smog. Soft production, exhaust gases are able to settle on gold products. If, for example, a person can wash away these impurities in the soul from the body, then they are not so easily removed from bracelets, rings, chains.
• Jewelry is polluted with all kinds of body care products, which many of us use almost daily to improve the condition of our skin. These are creams, lotions, decorative cosmetics.

Based on the foregoing, quite logical questions arise, what are the ways to clean gold from traces of this kind of pollution, which will help restore their shine and radiance. The easiest way is to turn to professionals who know for sure what to do and how to do it, but the fact is that such a service is expensive, that is, not everyone can afford it. In addition, in large cities there are many such jewelers who clean jewelry, but residents of smaller cities, towns and villages have to take an interest in how to clean gold with vinegar, soda, ammonia and ammonia, that is, the most popular substances found in any the house.

to contents ↑

Refining gold to a perfect shine at home

Professional gold cleaning products sold in specialized stores cannot be called affordable. Therefore, many simply forget about this problem, but it is not solved by itself. Therefore, the issue of self-cleaning gold every year becomes only more relevant. Do not rush to get upset ahead of time, because there are a large number of folk ways and means that our ancestors used. Now we will consider each of them separately.

The first method: purification of gold with ammonia

First you need to figure out which methods are the most effective, which ones can be used only in cases where there are no various decorative inserts, since they can suffer, because this method is quite aggressive.

Simply put, ammoniaOf course, you can clean the gold at home, it does not take much time, but some stones can seriously suffer. Therefore, you should be extremely careful and careful so as not to harm your favorite jewelry, which after such cleaning can go into the bin.

High-quality processing will require not only ammonia, but also hydrogen peroxide. Follow the instructions to achieve the desired effect:

1. Prepare a small enameled, glass or ceramic bowl to prepare our composition.
2. Pour about a glass of tap water into the selected container.
3. Add to the water three drops of ammonia, two tablespoons of hydrogen peroxide, a couple of drops of a good-smelling liquid soap, mix everything thoroughly. The mixture is ready.
4. Dip the gold in the finished solution, leave it in it for a couple of hours or all night.

As you can see, no special financial costs are required, since all components can be bought at any pharmacy at the lowest prices. Neither the oldest pollution, nor the oxidation film, which previously could not be cleaned up with anything, can resist such a powerful attack. Your jewelry will shine again and sparkle with its former splendor.

The second way: we clean gold with ammonia

At this stage, we will consider how to clean gold with ammonia at home, since this substance is considered ideal for such processing. Its difference from ammonia is in greater concentration and causticity.

Important! This substance is inexpensive, but it is recommended to work with it with extreme caution to avoid accidents, because if it suddenly gets into your eyes, you can even lose your eyesight.

Cleaning itself looks very simple:

1. Carefully select a cleaning container - it is better if it is glass or ceramic.
2. Pour undiluted ammonia into a bowl, put all the contaminated gold in it, and leave it overnight.

Important! If there are children or favorite pets in the house, make sure that the bowl with the ammonia solution is in a place that is not accessible to them. Do not forget that gold should be cleaned with ammonia in a respirator, because its vapor can damage the respiratory tract.

The third way: cleaning gold jewelry with vinegar

On the Internet, there are often recommendations on how to clean gold with vinegar. But according to experts, this is the most inappropriate option, in particular, when it comes to jewelry with precious stones or decorative inserts.

Acetic acid can damage them, because there are varieties of them that are not afraid of such an effect, but can harm others very much.

Important! If your gold has the lowest fineness, it is better to refuse such a cleaning option, because it has a lot of impurities and other components in the form of non-ferrous metals, to which acid can cause irreparable harm.

If you still decide to clean the gold with vinegar, take a solution of a weak concentration - not higher than 3% of the liquid, half diluted with clean water.

Fourth method: high-quality cleaning of gold with soda

All of the above methods are designed for a long exposure time. This is at least a few hours, more often for the selected substance to work, it takes even more time. But such an expectation is not always acceptable, because it often happens that you need to urgently put your jewelry in order, going for a business meeting or a date.

In the case of soda, you will have to work hard, but in the shortest possible time you will return to your rings, earrings, chain, bracelet a natural shine. To do this, you must:

1. Pour a glass of water into a bowl or saucepan suitable for boiling.
2. Put all your gold items in need of emergency cleaning.
3. After the water boils, pour a tablespoon of baking soda into a bowl.
4. Boil our mixture for five minutes, then drain the water, go over the decorations with an old toothbrush.

Important! Someone more like the option of cleaning gold with dry soda powder, but it is not suitable for home use, because soda is an abrasive and can simply damage the jewelry itself, natural precious stones, decorative inserts. The only acceptable option is when the soda is mixed with water to a paste.

to contents ↑

Stock footage

From this article, you learned several ways to clean gold with improvised means. We hope you were able to decide on the best tool for yourself and quickly tidy up your jewelry.