How to fold a sheet on an elastic band?

A sheet with an elastic band at the bottom is a relatively recent innovation of domestic manufacturers, although abroad this option of bed linen has been used for a long time. It is very convenient, because it does not slip and does not twist during sleep, but some housewives have difficulties with its storage. How to fold a sheet on an elastic band so that it does not take up much space and looks neat at the same time? Every housewife wants to fold the laundry beautifully so that it does not wrinkle and occupies a minimum of space in the closet. This is not so difficult to do, if not in a hurry, be careful and savvy. We will talk about various methods of compact folding such bedding in this article.

to contents ↑

Benefits of an elastic sheet

I would like to note that minor difficulties with folding and ironing this type of sheet are largely overlapped by its advantages:

• Such a sheet will easily replace a cover for a mattress, if you do not have one.
• This option is especially convenient for children, as it keeps its shape, regardless of how intensively the babies move on the bed.
• It is very easy to wash such linen, as well as to dry.
• The soft fabric is quite durable, which makes the elastic sheet a good buy.

to contents ↑

How to fold a sheet on an elastic band?

To save space in the closet, such sheets must be folded instead of just being crumpled. It will also help keep your laundry in order. For this, knowledge on how to fold a sheet with an elastic band is very useful to you. In fact, this is a simple process and as soon as you master it, you will very quickly tidy up the bedding, which you are going to put into the closet.

Procedure:

1. Run your fingers into two corners and stretch the sheet along the entire length.
2. Nest one corner in another. As a result, two corners should hang on one arm.
3. With your free hand, raise the next corner from below and put it on your already “occupied” hand.
4. Do the same manipulations with the fourth corner.
5. Shake the resulting rectangle.
6. Lay the sheet on a flat surface (bed or table). Smooth out all wrinkles.
7. If you did everything correctly, then the gum will pass from two adjacent sides.

Important! Perhaps in order for the edges with the elastic to lie flat, they will have to be ironed out.

8. Now fold the sheet across and along. You will get a neat, completely voluminous bundle.

That's all the stages of a seemingly impossible process.

Important! Folding a sheet on an elastic band in this way, it will look the same as a folded ordinary sheet. Repeating the procedure several times, you will subsequently very quickly and without visible defects fold such products.

to contents ↑

Do I need to iron a sheet with an elastic band?

The advantages of such a product are many, but the question of how to iron a sheet on an elastic band often confuses the housewives even before it is purchased, and it stops some from buying at all. Let's try to deal with all the intricacies of ironing such bedding.

Many manufacturers present their goods as a sheet that does not need to be ironed.This is explained by the fact that even with the highest quality ironing, an ideal surface is simply impossible to achieve. Therefore, it makes sense to save your time and do without this process. If for you not ironed linen is unacceptable, you just need to choose the most suitable option, how to iron a sheet on an elastic band.

Important! Terry sheets on an elastic band do not need to be ironed, because the effect of the iron makes them not so soft. All other fabrics should be ironed at the appropriate temperature. This information can be found on the label that is sewn to the inside of the sheet.

Today they made a whole science out of the ironing process. Below are the arguments, having studied which you will definitely want to find out how to iron a sheet on an elastic band, and you will understand where and what mistakes you made earlier.

If the sheet is not ironed correctly, then it:

• will lose a beautiful appearance;
• may become unusable ahead of time;
• lose the smell of freshness, which usually appears after washing;
• it may become unpleasant to the touch, and you will not want to sleep on such linen;
• gains creases and tissue defects that cannot be eliminated;
• will become dull.

Think about it, don’t you feel sorry for parting with an almost new bedding set just because it was ironed incorrectly? So, what do you need to know to prevent this?

to contents ↑

How to iron a sheet on an elastic band? Overview of Options

There are several ways to make an elastic sheet presentable with an iron. The hostess, having tried each of them, chooses the best option for herself and the next time she no longer thinks about the question of how to iron a sheet with an elastic band. Consider each of the methods in more detail.

Method number 1

The easiest option is to iron only the middle of the sheet and not torture yourself by smoothing the edges, which, as you can see, it is almost impossible to smooth on the board.

Important! Even if you spend a couple of hours smoothing the creases under the elastic, the result will still be minimal. All this will look as if the sheet was not ironed at all.

Method number 2

This method is quite original. It is necessary to put a sheet on the mattress, and iron directly on it. This method allows you to achieve the most optimal position of the sheet for smoothing all visible folds. But you should also consider the type of fabric. The result will depend more on this.

Method number 3

If you still want to get an almost perfectly ironed sheet, you need to iron it in a circle:

• So, first, iron the middle.
• Then you need to start ironing on one side and move around the perimeter, further pushing the edge of the matter. This is actually quick and easy. Even if there are small hitches somewhere, then when the sheet is pulled over the mattress, they will not be visible.
• Much depends on how tightly the fabric adheres to the mattress. If the sheet fits snugly, then even your not perfect ironing will be invisible.

As you have seen, it’s not so difficult to iron the tension sheets, which often cause a lot of problems. Using the simple recommendations from the article, work at the ironing board for you will cease to be so painful.

to contents ↑

Useful tips for ironing bedding

Perhaps you will say that you always adhere to all possible rules: avoid creases and spray with water, but as a result, after ironing, the sheets are all the same shapeless and very far from what they were after the purchase. To prevent this from happening, there are several additional secrets that not every hostess knows:

• The place for ironing should be well lit.
• It’s great if you have an ironing board, if not, it doesn’t matter either. It is enough to cover the table with a heavy dense cloth and make sure that it does not slip.If necessary, adjust the ironing board to the height of your height, so that it is convenient.

Important! If you need to bend during ironing, you will quickly get tired, and the whole process will seem to you a very difficult task.

• If the ironing surface is too small and the sheet is large, fold the fabric four times. In this case, you must try not to iron the bends and prevent the formation of pronounced folds. So your sheet will look more aesthetically pleasing.
• An iron with a sprayer is very good, but sometimes it’s much better to use a spray bottle to iron the clothes, to put gauze on top of the fabric.
• Try not to dry the sheets and duvet covers after washing until the end. It is better to iron them slightly damp. In this case, you will not need spraying at all.
• You need to keep track of where you put the iron when you turn or straighten the fabric. In no case should you place it horizontally on another part of the laundry. So the fabric can burn to the sole of the iron, and in this case you risk spoiling the product.
• If a nuisance suddenly happened during ironing - you lightly scorched linen or cotton fabric and left a yellow stain on the material, you can get rid of it with a borax (1 teaspoon per glass of water).
• Also, make sure that water does not get on the iron, as a short circuit may occur.
• Often when washing a thing is severely deformed, and a rectangle can easily turn into a curved trapezoid. To correct this defect during ironing, you need to sip the material by the ends, try to constantly align the fabric.
• Before you run the iron again on the linen, you need to iron it by hand and thus check for the presence of creases in the fabric. After ironing, it will be difficult or impossible to remove them.
• No need to iron the same sections of fabric ten times. If you see that the fabric is already even and smooth, then it’s enough, and it’s time to finish ironing.
• Immediately after ironing, there is no need to push bedclothes into the closet, it is better to let it cool.

Important! It is recommended to hide the laundry on the cabinet shelf after ironing after 1.5-2 hours.

These short and simple, but very practical and useful tips will help you deal with ironing in a short time. In doing so, you will do all the work perfectly and be satisfied with the result.

to contents ↑

Useful tips for storing bedding

Keep sheets on an elastic band, like everything else bedding, should also be correct. Failure to follow simple rules will lead to the loss of a beautiful appearance, the appearance of an unpleasant odor and rapid aging of the tissue. To avoid such a deplorable result:

• It is better to keep all the items from the bedding set together, put them in a stack and bandage them with a ribbon or rope. So your bedding will be kept in order, and you can more effectively use the storage space. In addition, it looks beautiful.
• For convenience, you can also store sets of sheets inside the pillowcase. So you can fold two or three sheets on an elastic band in one pillowcase. A pillowcase also contains a set of linen. Thus, your cabinets will become more accurate, and all the necessary items will lie together, which will greatly facilitate the search for the right thing.
• Winter sets made of soft and dense materials (terry cloth or flannel) should be folded separately. With the onset of warm days, they can be hidden in the far corner.
• Not only chests of drawers are suitable for storing linen. It can be folded into cardboard boxes and put on any shelf of the cabinet.

Important! It is unacceptable to store even new bedding in plastic bags.

• If you have the opportunity to buy two or three suitable sets at the same time, then mattress sheets, simple sheets, and pillowcases (of the same size) will be interchangeable. Another time, it will be difficult for you to find the same picture, so try to buy them all at once.
• It is very convenient to use color coding for bedding in your closet. For example, yellow linen sets for single mattresses, blue for children's mattresses, and beige for double mattresses.

Important! Bed linen should be changed at least once every 10-14 days, and immediately washed.

to contents ↑

Stock footage

Do not be afraid to buy a sheet with an elastic band because of the special care for it. As you can see, it is almost as easy to fold and stroke as a regular sheet. Therefore, taking into account the advantages and convenience of this element of bed linen, a sheet on an elastic band will be an uniquely useful acquisition. Take note of the good advice from this article and all problems with storage conditions and ironing by themselves will cease to exist for you.