How to remove lime from the walls

During the repair process in old apartments and houses, it is often necessary to remove the old whitewash. How to remove lime from the walls with minimal effort and time, you will learn from this article.

to contents ↑

How to remove lime from the ceiling and walls?

Nowadays, there are many ways and methods of removing old whitewash, but we will introduce you to the most affordable and effective. This occupation is dusty and you cannot do without certain preparation. For work you need protective clothing. Prepare in advance:

• protective glasses;
• respirator or gauze bandage;
• work clothes - that which is not a pity to spoil;
• hat and gloves.

When you are sure that you are ready to work, choose the method by which you will decide how to remove lime from the walls. There are three types of approaches to working with the old whitewash:

1. Dry.
2. Wet.
3. Using pastes.

to contents ↑

How to remove whitewash from the walls?

Depending on how you decide to remove the lime from the walls, you will need such tools and tools:

• For the dry method:
  • spatula or trowel;
  • a vacuum cleaner.
• For wet:
  • brush;
  • spray gun;
  • vinegar or soap solution;
  • rag;
  • water.
• To work with the paste:
  • wallpaper glue;
  • starch or flour;
  • bucket or pan for kneading paste.

Decide what inventory you have, put on protective clothing, and get down to business.

to contents ↑

How to remove dry whitewash from the walls?

If you have chosen a dry type of work, then you should know that it is effective in obsolete whitewashing, when it easily lags in pieces. Lime is removed from the surface mechanically, without the use of liquids. A distinctive feature of this type of work is a lot of dry dust. In this case, in order to choose the right method to quickly remove lime from the ceiling or walls, consider the 2 most popular methods. Give preference to the one that is more convenient in your opinion.

Method number 1

It involves the use of a spatula or trowel. It is as follows:

1. Cover the floor with newspapers or polyethylene.
2. Using the tool, scrape off the whitewash first in those places where it lags well.
3. Subsequently, tackle difficult areas, bringing the matter to an end.

Method number 2

In this case, a vacuum cleaner will help you. Dust and dirt will be less. Use it like this:

1. Put on a tube of your vacuum cleaner a special nozzle in the form of a spatula.
2. Turn on the vacuum cleaner and treat the surfaces as indicated in the first method.

to contents ↑

How to remove whitewashing from the ceiling and walls in a wet way?

Wet work is appropriate where the whitewashing itself does not go away, or where it is applied in such a thin layer that it simply cannot be removed with a spatula. A distinctive feature is a lot of dirt. Lime will practically drain to the floor and along the walls. Wet processing methods are slightly more than dry.

Method No. 1

You will need water and a wide brush. It works like this:

1. Prepare warm water and a brush.
2. After wetting the brush with water, treat all the necessary surfaces.
3. Change water if necessary.
4. If you see that in some places the whitewashing is tampered with a spatula, remove it. This will speed up the process.

Method No. 2

Use a spray gun. In this case, follow these instructions:

1. Dampen all the lime with warm spray water.
2. Wait until 20 minutes have passed and moisten again.
3. Arm yourself with a stiff brush or spatula and remove the whitewash.
4. Re-clean the entire work surface with a washcloth moistened with water.

Method 3

If you have a washing vacuum cleaner, this method is for you. You will not need anything except him. It looks like this:

1. Pour water into the container.
2. Turn on the washing mode.

Note: The vacuum cleaner may deteriorate from such a long work, so if you have a new one, give preference to other methods. In all cases, water can be replaced with solutions of vinegar and soap. In both cases, whitewashing will be easier to remove.

to contents ↑

How else can lime be removed from the walls?

A big innovation is the removal of whitewash with glue. Experts say that this type of work creates less dirt and makes it easier to clean ceilings and walls.

To do everything right, follow this step-by-step instruction:

1. Dissolve the glue for the wallpaper and let it settle.
2. Take a roller or a large brush and apply glue with a thick even layer on the lime.
3. Wait for it to dry and remove the whitewash with a scraper.

Note: Lime will not crumble into small particles and will be easily removed with glue.

If you did not have glue for wallpaper at home, then you can weld it yourself. For this:

1. Heat the water and add starch or flour to it.
2. Stir well and heat until thick.
3. Apply to whitewash with a brush and remove as glue.

to contents ↑

Stock footage

We introduced you to the most common and effective ways to remove whitewash from walls at home. If you stick to such schemes, then with the old lime you will have no problems and you will be able to complete your repair as soon as possible.