How to choose a sandwich maker?

A sandwich maker (or sandwich maker) is a kitchen device that makes it possible to quickly prepare a tasty and satisfying sandwich for a snack. Such a delicious meal will not only cheer you up, but also provide an excellent energy boost for most of the day. It is possible to prepare dishes using a sandwich maker without oil, which is important for people who are fans of healthy lifestyle. So how to choose a sandwich maker correctly?

Important! Before you go shopping at the store, decide on the functionality of the device. It is not at all necessary to purchase a “sophisticated” device with a huge number of programs, knowing in advance that you will not use them. Paying money for unnecessary features is unreasonable.

to contents ↑

Criterias of choice

Important points when choosing are:

• The stability of the device.
• Locking mechanism.
• Availability indicator.
• Case material.
• Price.

Consider the above criteria in more detail:

• The readiness indicator indicates that the device is ready to prepare sandwiches. It is more convenient to look at the indicator and see a signal of readiness than to stand near the device and wait for the right moment.
• The locking mechanism is also an important point. With this mechanism, casement flaps open and close easily. If the sandwich maker does not close, then you have overdone it and put in too many products. The presence of a locking mechanism is an excellent preventive measure against premature failure.
• The material of manufacture. Ideal if it is not a heating material. Then the device will be not only useful, but also safe.
• Stability to the device is given by special legs. It is necessary to pay attention to sandwiches firmly standing on horizontal surfaces. If the appliance is not stable enough, it may fall and fail. It is advisable that the legs do not slip.
• Cost factor. The fact that you should not overpay for unnecessary functionality has already been said. The acquisition of cheap models is also not welcome, as they are short-lived. The best solution would be the optimal balance between quality and value.

to contents ↑

Production material

The most popular material options for sandwich makers are plastic and steel.

Plastic

Compared to steel counterparts, plastic products are cheaper. However, durable plastic can not be called. If accidentally dropped, the plastic breaks.

Steel

Stainless steel products are much stronger and more reliable than plastic ones. The steel case reliably protects the parts inside the device from damage. However, the cost of steel products is higher.

Important! Many steel sandwich models are equipped with a comfortable handle made of insulating material. This is especially important for families with children. The case of steel sandwiches is thermally insulated, which makes them completely safe.

Thus, when choosing between plastic and steel structures, the advantages are clearly on the steel side.

to contents ↑

Number of plates

Naturally, the dream of many housewives is not an ordinary sandwich maker, but a multifunctional device with which you can cook various dishes. This is an important saving, not only of money, but also of the working space in the kitchen.

Important! If you need to prepare a large number of sandwiches for a large family, it is better to buy a device with more than two plates.

Very comfortable models with removable plates. A creative hostess will be able to use such a device as a grill or device for baking waffles. Of course, the cost of the “three in one” device is much higher than that of standard models, but the functionality is up to par. As they say, everything is at hand.

Important! If you already have a grill and a waffle iron, then it makes no sense to purchase a multifunctional device. At the same time, save on the price of the device. The choice of a specific model depends on the scenario for using the sandwich maker and whether you have kitchen appliances.

to contents ↑

Additional functions

In addition to the listed functions, there are a number of additional features that may also interest you if you plan to choose a good quality sandwich:

• Protect the handle from high temperatures. Models with a thermal insulation layer on the handle are more secure. The likelihood of getting burns is minimized at times.
• Overheat protection. Thanks to this feature, appliances last much longer.
• The presence of non-stick coating. It does not allow to overcook or dry sandwiches. Thanks to the non-stick coating, the preparation of sandwiches takes place without oil. It is possible to maintain the beneficial qualities of all products used.
• Thermostat. The presence of a thermostat is necessary when preparing various dishes. The thermostat will not hurt when heating already prepared sandwiches.

to contents ↑

Useful “little things”:

• Pay attention when choosing the configuration and material of the legs. It is advisable to purchase a model with legs made of rubberized material. The legs are not only stable, but also do not slip on the surface. This reduces the likelihood of an accidental fall of the device.
• An important point is the length of the cord. The larger it is, the more convenient it is to install a sandwich maker. But this increases the likelihood of accidentally grazing the cord.

Important! The model with a short cord is practical for the kitchen, where there is a socket next to the table.

to contents ↑

Overview of the best manufacturing companies

The rating of sandwiches will take into account another factor - the brand.

Clatronic

Instruments with mechanical control, easy to maintain, with non-slip legs. The processing quality of the sandwich ingredients is excellent. The average cost is about $ 15.

Redmond

Instruments from Redmond are equipped with handles with a two-level coating of heat-resistant material. Minus Sandwich Maker “Redmond” - with a large number of products, the sash may not close. The average cost is about $ 15.

Tefal

The devices from Tefal are easy to maintain, the preparation of sandwiches is very fast. Products are fried evenly. The minus of the Tefal sandwiches is that they are connected only with a cord. There is no power button. Cost - about $ 25 on average.

Moulinex

Multifunctional devices that allow you to cook sandwiches with varying degrees of roasting. Sandwiches are very easy to use and care. The average cost is about $ 25.

to contents ↑

Best sandwiches - popular models

Consider the best multifunction devices.

Clatronic CT 3477:

• The device has 2 compartments (4 sandwiches).
• The shape of the sandwiches is a triangle.
• Management - mechanical, there is a readiness indicator.

Important! Of the additional functionality - a handle with a heat-resistant coating, non-stick coating, protection against overheating.

Benefits:

• Uniform processing of products.
• Ease of care.
• Legs made of non-slip material.

Minuses:

• Short cord.
• No on / off toggle switch.

Redmond RSM M1402:

• 640 Watt unit, with 2 compartments for 4 rectangular sandwiches.
• Management is mechanical.
• There is an indicator of heating and availability.
• The device has a heat-insulated housing, which makes it safe, equipped with a cover lock.
• There is a non-stick Teflon coating.

Benefits:

• Compactness.
• Quick cooking.
• Handles with a two-level heat-resistant coating.

The disadvantage is that with a large amount of filling, the handle does not close very well.

Tefal SM 3000 72:

• The device is 640 watts.
• Simultaneous tab - 4 triangular sandwiches.
• Sandwich maker on a mechanical control.
• There is a ready indicator.
• The device has a compartment for storing the cord.
• There is a good non-stick coating.

Benefits:

• Extremely easy care.
• Toasting evenly.
• Fast cooking.

The disadvantage is that there is no power button.

Steba sg 35

One of the best models in the rating of sandwich makers 3 in 1.

Functions:

• Grill processing products.
• Making sandwiches.
• Baking waffles.

The device is mechanically controlled, there is an indicator of readiness and heating. The working plates are made of aluminum, with a non-stick coating. Rubberized legs, the handle has a lock.

Turbo TV-1150W

A device that combines 5 functions:

• Sandwiches.
• Grill processing products.
• Cooking fried foods.
• Baking Muffin.
• Cooking Waffles.

From the characteristics we distinguish the following:

• The pan is equipped with interchangeable forms for cooking different dishes.
• Mechanical control, there are indicators of work and power.
• It is possible to use a sandwich maker as an open grill, expanding it 180 degrees.
• The device is compact, easy to clean.

There is only one drawback - high energy intensity.

to contents ↑

Stock footage

The rating of the best sandwiches and basic recommendations will allow you to purchase a device that best suits your requirements and will not just gather dust on a shelf, but will allow you to prepare delicious food for a snack in a couple of minutes.