The wall in the apartment gets wet - what should I do?
A modern apartment is not only comfortable housing with pleasant chores, but also many serious problems. For example, homeowners in apartment buildings, especially people living in corner apartments, periodically struggle with such a difficult problem as the walls in the apartment get wet. What to do in such a situation, because due to the temperature difference of the external atmosphere and air inside the apartment, condensate gradually increases on the walls. If you let this problem go by chance, then over time mold develops, which contributes to the appearance of respiratory ailments, and then they are difficult to treat. Because of this, it is necessary to correctly identify the cause of the additional condensation of water and immediately eliminate it. How to do this - we will describe in this article.
to contents ↑Ways of struggle
The wall in the apartment gets wet - what should I do? The formation of a raw wall occurs for various reasons, therefore, the fight against this phenomenon occurs in different ways:
- When the walls get wet with the completion of construction or repair, you just need to carefully ventilate the room, and in winter it is necessary to increase the flow of heat. When the batteries are not efficient enough, it is better to use heaters for wall heating.
Important! If this option is acceptable to you, then read about which is better to choose a heater in terms of efficiency, economy, convenience:
- Lack of ventilation in housing plays a large role in the formation of dampness. In this case, there may be problems with air circulation both on one wall and in the apartment. The local case is not difficult to eliminate, you just need to rearrange objects that impede the movement of air. For example, water accumulates on a wall section behind curtains and home furniture. Just swap furniture, open the curtains, put next to household furniture - a fan or heater.
Important! General ventilation problems can be corrected by taking comprehensive steps. This includes: checking the interior ventilation vents, perhaps they were accidentally laid with rags and small things, glued with wallpaper, covered with furniture. If the problem is much more complicated, find out where to go if ventilation does not work.
- Weak waterproofing is a more complex problem. There is only one way out: you need to look for the area of moisture distribution and reliably isolate it. In most cases, seams come out from the outside of the house. Only professional builders can work with this, an amateurish approach will only worsen the situation. Another method - constant ventilation, will also help, but you need to know that it does not completely eliminate this drawback.
- Freezing the outside of the building is another case in which independent actions to solve the problem of wet walls can seriously aggravate the situation. Most residents, unable to protect the wall from the cold climate, seek to insulate the apartment from the inside, and often this leads to worse consequences. The place of dew formation will completely change the location, becoming, on the contrary, closer to the room, and all the water in a larger volume will be collected under the heater, and from there it will drain into the apartment.For external insulation, you can use polystyrene, mineral wool, but one of the most effective options, albeit expensive - is liquid insulation.
Regarding the problems of walls, you should understand that if in most cases you are not involved in construction and your knowledge of methods of wall insulation is most likely not enough, the best option would be to entrust this work to professionals who are experienced and knowledgeable.
to contents ↑Tool base for repair
Wet wall in a brick house - what to do? To eliminate a wet wall in a room, as well as for any repair, it is necessary to have the appropriate tools and materials selected by type of repair and level of technology.
The following must be included in the list of required:
- distance measuring tape;
- level for determining the angle of curvature of the wall;
- hammer for hammering nails, dowels and even screws;
- hacksaw for sawing boards and plywood;
- construction stapler and staples;
- construction thread or twine;
- trowel;
- spatulas.
This list cannot be completed. The emergence of new tools very much depends on the nature of the problems and even on the developed skills. As a result, each owner of the apartment or a construction foreman decides on the choice personally.
to contents ↑Thermal insulation
You can decide why the wall in the apartment is sweating, what to do, against the background of an attempt to implement another way to eliminate the damp area on the wall, which is quite effective and frequent in use. However, its serious drawback for apartment owners is that it cannot be used by them in the classic version, since thermal insulation must be carried out from the outside. It is almost impossible to independently carry out such work. For example, the option is desirable for separately located buildings, lower floors, as well as houses where you do not need to climb to a high height to make the finish. In other cases, you will have to invite professionals.
Thus, when repairs relate to a multi-story building, walls will only have to be insulated from the inside. However, if you do everything right, you can get rid of wet walls. But at the same time it is necessary to remember two nuances:
- Before repairing a wet site, it is necessary to determine the level of water absorption of the purchased material. It determines the rate and amount of water removal from the room. The lower the level, the more optimal will be the water-repellent characteristics of the material. This will help to forget about such a problem as a wet wall in one of the rooms in winter.
- To decide on the nature of the repair, one must not forget to perform a procedure such as measuring the thickness of the layer of material purchased for work. It is important to form a density at which a sufficient level of thermal conductivity is found. If it is small, then the layer must be formed thin.
Only by highlighting all the marked points, you can get a significant decrease in humidity in the room and keep the renovated look near the wall. In any case, it is very necessary to correctly find the insulation materials that are in stores in large quantities. For high-quality repairs, it is optimal to choose well-known manufacturers who strive to produce material at a high level of quality.
to contents ↑Who to contact for help?
If your measures, in spite of all efforts, have been inconclusive, you cannot understand why the wall in the prefabricated house gets wet, the walls remain the same wet spots, and the air gives out the mustiness of the raw stucco and wallpaper. Then you need to seek help from specialized organizations:
- First of all, you need to take a written statement to your management company. In this case, try to go to the logical conclusion of the problem.
Important! Housing companies do not want to deal with such problems, but this is the sphere of their activity, they receive money for this. Talk to your neighbors, most likely they are in the same trouble.
- The application is written in duplicate. In this written document, it is necessary to carefully describe the process of wetting the walls, in which place of the apartment and when. Be sure to mark the season - this may suggest the causes of a damp spot.
Important! Make sure that the brought statement is noted, and take one copy with a mark on the time of adoption.
- The management company is obliged to respond to your signal and send a specialist to you to inspect the housing. As a result, a document must be drawn up stating that the wall in the apartment is really damp, with specific reasons highlighted. Take a copy of it.
- Having completed the writing of the act, the company must decide on the nature of the work (repairing the joints, increasing the efficiency of the walls, fixing the roof, eliminating leaks in the basement) and the period within which they will be done. Keep a copy of this document for yourself.
- When the process stops (this happens, unfortunately, not so rarely), time will be violated, with accumulated copies you can go to the relevant authorities, in particular, the prosecutor's office. But focusing on this, of course, is not worth it. No one is going to contact this serious structure. Therefore, your tough attitude should encourage housing and communal services employees to finish the job.
Stock footage
When you cannot understand why the walls in a brick house get wet, what to do, we suggest you work with professional construction masters who will quickly do all the finishing work and deprive you of this “raw” problem. Remember, not only the safety of the decoration of your home, but also your health depends on it!
(No ratings yet)
Loading...
