Do I need to glue non-woven wallpaper with glue?

Non-woven wallpaper is one of the most practical and prestigious finishing materials, they are not cheap, but working with them is a pleasure. They are very simple both in terms of wall pasting and maintenance. To properly paste the walls with panels on the non-woven fabric, you need to know a number of specific points, in particular, whether it is necessary to smear glue on the non-woven wallpaper. This will be discussed in this article.

to contents ↑

Finishing Features

The wallpaper market is incredibly diverse. Usual types of trellis, for example, paper, need to be impregnated with an adhesive before mounting on the walls, after waiting a bit for them to swell. Non-woven decoration materials are an exception to this rule. All that is needed is to pre-measure the length of the panel and spread the wall with glue.

Important! Make sure that by the time the fabric is glued to the wall surface, it does not have time to dry. To avoid this, smear the area in two layers or pre-treat with a liquid adhesive solution.

to contents ↑

What to glue - wallpaper or wall?

Before you start finishing work, study the marking on a roll. Do I need to glue vinyl wallpaper on a non-woven basis?

• The image of the paint brush, the handle of which is perpendicular to the surface of the wall, indicates that it is smeared with glue.
• If the brush handle is perpendicular not to a vertical, but to a horizontal surface, it is necessary to additionally apply the composition to the wallpaper panel.
• Paper-based trellises are coated with glue. In the process of applying the adhesive composition, the sheet swells and does not deform after installation. At the same time, it is impossible to glue the wall, as this creates air bubbles.

Important! Self-adhesive finishing materials with pre-applied impregnation on the back are also on sale. It is only necessary to sprinkle water on the trellis, and you can begin gluing the walls.

to contents ↑

How to apply the composition?

To begin with, decide which composition to use for gluing. It is advisable to use the information printed on the wallpaper roll. The manufacturer indicates the type and brand of glue that is best suited for this type of wallpaper.

A prerequisite for obtaining a good result is the impeccable cleanliness of the wall. The painted surface needs to be sanded, and then washed off with a special tool. After that, it is washed again with clean water and allowed to dry.

Important! The absorbent surface (for example, from gypsum or drywall) must first be primed with a special composition.

Here are some tips to help you get things done:

• Prepare glue in accordance with the instructions.
• The beginning of gluing paintings - at the request of the owner, is made from a window or doorway.
• Apply the adhesive mixture to the walls with a roller with a short pile or a wallpaper brush.
• The composition is not distributed exactly to the width of the roll, but with a small margin.
• Particular attention is paid to skirting places and corners.
• To apply glue in these places use a smaller brush.

Important! You can paste the walls with non-woven fabrics in two ways: from a roll or by pre-cutting strips of the desired length. The first method is more suitable for those who have experience in finishing work with this material.

At the end of mounting the panel on the wall, carefully smooth it from the center to the edges. When smoothing, air bubbles are removed.After that, cut off the excess part of the canvas, located at the baseboard. This can only be done after the wallpaper has dried out properly.

to contents ↑

Stock footage

Despite the ease of use, work with non-woven fabrics has its own specifics. If there is any doubt whether it is necessary to glue vinyl wallpaper on a non-woven basis, do not be too lazy to read the instructions and study the markings. Failure to comply with the technology can lead to sad consequences. Up to the point that the walls have to be re-glued again.