DIY tire stool

Today, decoration and arrangement requires not only a summer cottage or a country house, but also a garden gazebo or even a garage. You can decorate these structures with various interior items made from improvised materials that can be found in any country house. For example, you can make an original ottoman from the tire with your own hands. By the way, you can find car tires from any car enthusiast or at a tire repair shop. Just remember how before almost at every entrance you could meet a beautiful flowerbed of tires. Today we will consider a step-by-step master class, which describes how to turn an unnecessary thing into beautiful furniture.

to contents ↑

Making ottoman tires for beginners

Such an item will become a truly exclusive and original decoration that can be used in arranging a gazebo or garage. It is necessary to attach your own imagination to the work, to show creative skills. If you make a pouf from a tire with your own hands, then you will get a stylish and original design.

Necessary tools and materials:

  • Old car tire.
  • Twine.
  • Self-tapping screws.
  • Plywood.
  • Glue gun.
  • Lacquer.
  • Drill.

1457388011115576359

Complete these steps in this sequence:

  • Cut two circles of plywood sheet to fit the tire.
  • Lay plywood on top and bottom on the tire. Attach it to the tire using self-tapping screws.
  • Use a glue gun to glue the twine to the plywood. Rotate the twine in a circle, sequentially performing turns, press them tightly to each other. Put the twine until the ends of the tire completely close.

Important! It is better to start gluing from the center, using the principle of the cochlea.

  • Coat the glued rope with varnish to protect it from the adverse effects of sunlight or weather.

As a result, you get a great design solution.

Important! The ottoman will come out beautiful and economical. You can put it in the gazebo, in the garage or on the veranda.

to contents ↑

Original do-it-yourself ottoman made of wheels

Here is another good idea how to make a ottoman from a wheel with your own hands. The first step is to prepare the tires properly.

Important! If you previously used them for a car, first rinse them with water using washing powder and a brush to remove any clay or dust.

Prepare the following materials from the list:

  • Old tires from a car.
  • Thick fabric or mesh.
  • Foam rubber.
  • Lace or fringe.
  • Finishing fabric.
  • Needles, strong threads.
  • Self-tapping screws.
  • Sewing machine.

You must do the following:

  • So that you get an ottoman in height, like an ordinary stool, put two tires on top of each other, then connect them using electrical tape.
  • Screw the tires on the inner surface with self-tapping screws.

Important! Check that the wheels are firmly coupled for a strong and reliable frame.

  • Measure the diameter of the wheel hole, cut a circle of the same diameter from the foam rubber. Sew foam on the sides of the frame to make the ottoman soft and streamlined in shape.
  • Cut a rectangle from foam so that one of its sides coincides with the height of the frame of the future product, and the second corresponds to the length of its circumference. Wrap the foam rubber frame, fasten its ends with a strong thread.
  • Close the hole with foam rubber. But first, sew the upper and lower holes with a special mesh or strong fabric, attach foam rubber on top of it.
  • It is better to use high-quality furniture fabric as upholstery. Cut a rectangle from it so that its short side corresponds to the height of the walls of the future ottoman plus 10 cm on each side of the turn. The long side should be equal to the outer diameter of the tire plus a line of 1 cm. Sew the two short sides of the upholstery, pull it on top of the wheels.

Important! It is better to do this on a sewing machine with a double seam.

  • Now you need to finish and fasten the upper and lower parts of the product together. Use a strong thread and needle to fasten the structure on the inside. Pass the thread from the top edge, then pull it inside, pull it from the bottom edge.
  • After complete sheathing, lay a soft pad on top. Decorate it with applique, fringe, lace or embroidery.

In the process of decorating ottoman, use improvised materials, your creativity and imagination.

to contents ↑

Leather ottoman for a summer residence

If you are a lover of unusual and original things, then try to make a leather ottoman from tires with your own hands. The master class given in this section will help you realize your dream, truly decorate your home or summer cottage.

You will need the following materials:

  • Three car tires.
  • Foam rubber.
  • Epoxy resin
  • Genuine or synthetic leather.
  • Plywood or cover from a large bucket of paint.
  • Powerful stapler.

Make an unusual ottoman according to this instruction:

  • Wash tires thoroughly to remove accumulated dirt. Apply glue to the highest point where they will be in contact.
  • Put the tires on top of each other. You can adjust the height yourself. For the glue to dry completely, wait a day.
  • Measure the diameter and height of the tire. Add 2-3 cm to the seams on the seams. Cut a rectangle from the skin. Then cut a circle slightly smaller than the diameter of the tire for the bottom cover. Wrap the bus bar upside down with the rectangle.
  • Secure the shape of the pipe with pins to make it a bit tight. Carefully remove the pipe, sew it. Fold the part twice in width, make marks to divide the pipe into 4 equal parts. Fold the circle in half, again make marks to divide it into 4 parts. At the marks, connect the circle and the pipe.
  • Spread the fabric evenly, fasten the parts with pins, sew a circle to the pipe. Turn out the resulting cylinder, put it on tires.

Important! Tighten the fabric firmly, attach it to the rubber with a stapler.

  • Determine the diameter of the wheel, reduce the size by 4 cm. Then, cut a circle of the same diameter from plywood. Place foam rubber on top of the circle, then circle it 2.5 cm more. Cut a circle from the fabric that is 2.5 cm larger than foam rubber. Connect the stapler to all parts of the cover and glue it to the base of the future stool.
to contents ↑

Stock footage

So your wonderful tire stool is ready. How to make a ottoman in several variations - you now know, that means - from now on you can decorate with such elements not only your suburban area, but even your apartment. If you choose more original and stylish materials as decoration, then your home will become really fashionable and cozy.

1 star2 Stars3 stars4 stars5 stars (No ratings yet)
Loading...
Adblock detector

Wardrobe

Electronics

Wash