Flowing washing machine from below

Today, a washing machine is one of the most important attributes in every home. It performs an important function - it ensures the cleanliness of clothes and linen for every person, and also saves a lot of precious time. But in return for its usefulness, it requires careful and timely care. If time does not provide care for the "assistant", then it will quickly fail. Repair and specialist services at the moment is an expensive pleasure. Therefore, the consultants, when buying a washing machine, recommend operating it for its intended purpose and does not neglect the appliance. It may be that the reason that the washing machine flows from below is the natural wear of the parts. But more about this in the text below.

to contents ↑

The main types of breakdowns in which a washing machine leaks

A wide range of automatic washing machines of different models and manufacturers is presented on the market and in stores. Each model has its own advantages and disadvantages. The most common malfunction is that the washing machine leaks from below. The reasons for the appearance of such a problem can be a huge number.

The most common are:

• malfunction of the drain pump;
• defects in the loading tank;
• damage to the drain and filler pipe;
• stuffing box damage;
• blockage of the dispenser of the washing machine;
• cracks and holes in the nozzles of an automatic machine;

In order to eliminate these causes of the malfunction, it is necessary to conduct a preliminary diagnosis, and then follow certain repair rules and preventive measures.

to contents ↑

What to do if the washing machine is leaking?

When the washing machine has flowed, you need to take action very quickly and accurately. If the water leak is not timely eliminated, then serious problems may subsequently arise not only with the washing appliance, but also with the floor covering, and possibly with other devices.

Important! The main rule for eliminating such a malfunction is to disconnect the washing machine from power. This will significantly reduce the risk of serious consequences. Shut off the water supply to the automatic washing machine immediately. Only after the implementation of this two basic manipulations, you can safely proceed to the process of inspection of the washing household appliance.

to contents ↑

How to start a breakdown inspection?

First of all, it is necessary to determine why the washing machine flows from below. It is necessary to inspect the washing machine externally and remember in what mode it worked.

Using a visual inspection, three leak points can be identified:

• Dispenser for washing powder.
• Drain pipe.
• Cuff of a door of a loading tank.

to contents ↑

Precautionary measures

Even when inspecting the washing machine, you need to be extremely careful and follow a few important rules:

1. If water is found on the floor around the machine, in no case should you step on it. Since the washing machine can be connected to the network and you may be shocked.
2. Drain the remaining water through the drain pipe.
3. You need to remove the laundry from the drum.

Important! If you are not confident in your technical skills, then you should not undertake any repairs or troubleshooting.It is recommended that you contact a qualified service technician for service. They will be able to correctly determine the cause of the malfunction and provide high-quality repair of your equipment.

to contents ↑

Hose problems

It is correct to determine that the reason that the washing machine flows from below during washing is really the inlet hose - it is very simple. To do this, wrap the tube with paper and carefully look at where the wet spot appeared?

Most often, water leakage occurs at the junction of the hoses with the washing machine. To prevent the washing machine from leaking:

• You just need to replace the special gasket, which will provide strength in the connecting places on the hose.
• If even minor cuts are found on the hose, they can be patched with a rubber patch or special glue.
• If holes are found on the tubes, do not try to repair them. It is much easier to buy new ones at the plumbing shop, as they quickly wear out due to the high pressure of the water supply.

to contents ↑

Dispenser leakage

The dispenser is a special compartment in which washing powder and various detergents for washing are poured. To determine that the problem lies in the dispenser is quite simple. It’s enough to take into account one simple rule - the washing machine flows when water is drawn. It is in this case, it can be firmly concluded that the problem actually lies in the malfunction of the dispenser.

It can be damaged due to many different factors:

• a thick layer of sediment;
• due to large powder grains, the metering grid is clogged;
• water pressure exceeded.

To eliminate such a malfunction, it is recommended to remove the dispenser from the washing machine and rinse it under running water. After that, install it in place and check the operability of the washing machine.

Important! For the effectiveness of the result and to prevent the occurrence of a situation when the washing machine flows from below, the water pressure should be normalized.

to contents ↑

Door cuff leaking

If the cuff of the loading tank is damaged from the outside, then water will pour out from the front of the washing machine. If the cuff is damaged on the inside, then water will spill out on the corresponding side.

Important! Typically, the cuff is damaged due to prolonged use or foreign objects (toothpicks, buttons, small toys, coins, and some parts of things).

To solve this problem, it is recommended to use a special waterproof superglue or rubber patch. After their application, it is necessary to turn the cuff in such a way that the damaged part is at the top of the loading hatch. This will ensure the long-term repaired cuff.

Manipulations with superglue are no different from the patch method. Both methods are ultimately very effective.

Important! Repairing the cuff can only be useless if the damage is too serious. Then it is recommended to purchase a new cuff.

to contents ↑

Stock footage

From this article, you learned about all the reasons why a washing machine can leak from below. We hope you were able to independently identify the real cause and fix the problem at home. Next - follow the preventive measures and regular maintenance of your equipment so that it works properly.