How to fasten skirting boards to a concrete wall?

One of the final stages of repair is the installation of a skirting board. This decorative element hides the transition from the wall to the floor. When laying the laminate, a technological gap remains near the wall - in this case, the plinth closes it. Whatever your floor covering and whatever you cover your walls - without a baseboard, this transition will be unaesthetic. In this article, you will familiarize yourself with the installation of this product, learn how to screw skirtings to a concrete wall. Make sure that they are irreplaceable and determine for yourself the most comfortable look of the skirting board and how to fix it.

to contents ↑

Types of baseboards

It is necessary to choose skirting boards, depending on the type of flooring. There are certain recommendations from what material it is best to use decorative strips. These recommendations directly depend on the material that covered the base of the floor, and on the visual preferences of the owners, the design of the room.

In order to figure out which planks to use in your room, it is worthwhile to dwell in more detail on each type of product.

357215-697x952

Wooden baseboards

This type is recommended for use in rooms with solid wood flooring complete with parquet.

Important! Experts do not recommend combining planks of artificial materials with natural materials for flooring.

29ef63247c578f23e8fb0fca2069f5f0

Wooden skirting boards complement the natural flooring, they are environmentally friendly and durable, they function perfectly with the coating of valuable wood species. The main requirement for the use of wooden planks is to maintain optimal humidity in the room. It must also be observed and maintained at a stable mark for floors made of wood or parquet.

The question arises: how to fix a wooden plinth to a concrete wall? These works should be carried out very carefully, because such strips do not have decorative overlays and corners, so it is best to trust the professionals.

interer_010_0-min

Plastic skirting boards

This is perhaps the most popular type of planks, due to the relatively low cost of the goods, in contrast to similar wood products.

Plastic skirting boards are incredibly easy to install, well hide various irregularities. There are many models and colors of plastic strips.

Important! Usually they are combined with laminated flooring, linoleum, carpet, tiles.

This product is unpretentious in use, does not lose its functions when temperature and humidity changes, and tolerates frequent cleaning and washing.

kak-vybrat-plintus-dlya-laminata-2

MDF skirting board

Such products are made of fiberboard, harmful resins are not used in their production, so they are considered environmentally friendly. MDF strips are more durable than wood. Prices are pretty high, but at the same time they are not inferior to wooden counterparts in appearance, they look good in modern interiors.

MDF skirting boards can be selected for the color and type of wood imitated on the laminate, it is also possible to purchase such planks for painting.

Important! Often they are used with laminate flooring.

kak-vybrat-plintus-dlya-laminata-26

Laminate skirting boards

Such strips are produced by manufacturers of laminated coatings. When purchasing a laminate, contact the seller of the store, perhaps he will offer you a bar for the color of your coating, since manufacturers use decorative films of the corresponding laminate model in its manufacture.

The material of manufacture and the external characteristics of the laminate skirting board are very similar to MDF strips.

kak-vybrat-plintus-dlya-laminata-28

Polyurethane baseboards

Most often, such strips are available in white, they are in perfect harmony with the ceiling baseboard and molding. Some masters provide services for painting such strips.

Their advantages include durability, special flexibility, resistance to changes in humidity and temperature.

Important! Such slats are good to use in rooms with high humidity, especially in bathrooms.

stupeni-dlya-lestnic-otdelka-401

Metal and concrete skirting boards

They are not so popular, they are more difficult to find on sale. Use in rooms where it is necessary to observe a certain style. The cost of such skirting boards is very high and, as a rule, they are made by special order, with technical requirements from the project designer.

to contents ↑

Mounting Methods

After you have studied the information about the types of skirting boards, decided and purchased the necessary number of planks, it is worth familiarizing yourself with the methods of their installation. Whichever mounting method you choose, remember that the surfaces on which they are mounted must be as even as possible. After thorough preparation of the surfaces, installation is commenced.

How to attach baseboards to a concrete wall? There are several basic ways to mount them. Check them out in more detail.

Mounting on fasteners or clips

To fix plastic skirting boards, special mounting clips are often used. They can be made of plastic or metal. The principle of fixation is to fasten the clips to a concrete wall, after which a plinth is mounted on these clips.

The algorithm for mounting strips on clips is as follows:

  1. Calculate the required number of clips, based on the fact that it is recommended to place fasteners at a distance of no more than 50 centimeters from each other. If there are corners in the room, then the fasteners must be installed no further than 10 centimeters from the corner.
  2. When you have calculated the required number of clips, you can proceed to their installation. For this clip is applied to the wall and a simple pencil is used to make a mark indicating the place for the hole for fixing the fasteners.
  3. Then, using a punch in the wall, make holes for the dowels.
  4. Using a hammer, drive dowels into the holes.
  5. Clips again to attach to the wall, and using self-tapping screws to fix to the surface in the places of installation of dowels.
  6. After all the clips are fixed, insert the electric cable into the special grooves. This item is relevant if you purchased special strips with the ability to hide an electrician in them.
  7. After all of the above actions, it remains only to install the baseboard on the clips. He sits on the clip and snaps into place.

Important! This mounting option is good because visually there are no signs of fixation. Planks look solid and neat.

porozhek-dlya-laminata-osobennosti-konstrukcii-7

Mounting skirting boards on self-tapping screws

There are skirting boards that are fixed to the wall with screws without the help of special clips. The principle of fastening is somewhat similar to mounting on clips. How to fix skirting boards to a concrete wall in this way?

The work algorithm is as follows:

  1. It is necessary to begin installation work from the corner near the doorway.
  2. Attach the bar to the wall, starting from the recommended point, and measure the required length. Cut off excess with a hacksaw.
  3. If it is necessary to veneer the corner, then measure the bar to the corner, cut off the excess using a special corner and form a bend.
  4. Try on the wall part of the planks with a bend, and if they lie flat, proceed to fixation.
  5. Having removed the front removable strip, mark the holes for fastening along the entire length of the baseboard. They should be spaced from 30 to 50 centimeters apart. The frequency of fixation points will depend on the evenness of the wall. The smoother the surface, the further you can position the fixing points.
  6. Drill a hole in the baseboard with a drill.
  7. Mark the fixation points with a pencil, moving them through the holes on the wall.
  8. In the wall, make holes with a perforator under the dowels, according to the intended fixation points.
  9. Using a hammer, it is necessary to drive dowels into the wall.
  10. Attach a bar and make sure that the holes match, and then mount the baseboard to the wall using self-tapping screws that are inserted into the dowels.
  11. Perform this operation along the entire perimeter, moving from the recommended starting point, until the entire perimeter is closed.
  12. The final step is to establish the faceplate of the baseboard, which hides the places of fasteners.

Important! This method is good in that there is no need to purchase special clips for fixing the strap. It is quite convenient and easy to execute, it requires only accuracy and accuracy of measurements.

derevyannii_692

Glue mounting

This installation method is the fastest and most convenient, it is popular for fixing MDF skirting boards and trims with a flat back surface. With such a fastening, it is impossible to hide an electrician in the bar. Skirting boards are thus glued to the wall once, they can not be removed without damaging the bar.

How to attach baseboards to a concrete wall using glue? To do this, you must adhere to the following sequence of actions:

  • Prepare the necessary tools and materials. The main ones include “liquid nails” and an assembly gun.
  • Make sure the walls are even in order to make a quality installation. If there are irregularities, they must be eliminated. The surface should be as smooth as possible.
  • Try on the skirting board, fit all the joints to each other.
  • After fitting the elements, proceed with their fixation. To do this, use a special gun to apply “liquid nails” to the bar from the back.

Important! Glue must be applied carefully, without surplus, otherwise they can tread and stain the walls. Surplus can be removed from a strip not yet glued with a spatula.

  • Press the baseboard against the wall and hold it in this position for about 2 minutes.
  • After you stick the planks over the entire area, press them against the wall with heavy objects, these can be bricks, and leave to dry for about a day.

Important! As you can see, this method is very convenient. Using it, you will not have to make much noise and dust, as in the case of fixing on dowels and screws. However, adhesive mounting restricts easy access to the wall and floor, permanently fixes the bar to the wall.

to contents ↑

Stock footage

After reading this article, you got acquainted with the types of skirting boards, learned how to fix the skirting boards to a concrete wall. As you can see, there are many installation methods. Based on your capabilities, skills and the type of skirting board chosen, you can easily choose the option that suits you.

1 star2 Stars3 stars4 stars5 stars (No ratings yet)
Loading...

Report typo

Text to be sent to our editors:

Adblock detector

Wardrobe

Electronics

Wash