Mold and mildew remedy on the walls in the bathroom

Fungus and mold are very common in bathrooms, because in these rooms favorable conditions have been created for the reproduction of microorganisms.

Gray and black spots look unaesthetically on the walls, ceiling in the bathroom, and also pose a potential threat to the health of residents. Mold and fungal spores spread through the air, enter the person’s lungs, and candidiasis, allergic diseases, and even asthma can be the consequences. If you encounter such a problem, you need to fix it as soon as possible. Properly selected remedy for mold and fungus on the walls in the bathroom - folk or industrial, helps to solve this problem. Let's consider everything in detail.

to contents ↑

Causes of fungus and mold in the bathroom

Mold on the walls in the bathroom is common. It is necessary to understand why she appeared. Otherwise, the struggle with it will be endless.

There are several reasons why fungus and mold appeared:

• High humidity.
• High air temperature.
• Lack of natural light sources.
• The presence of dark, inaccessible places.
• Ventilation problems.

Consider them in more detail:

• Fungus and mold need a humid environment - the bathroom is an ideal place for this, because it constantly uses water.
• Dryness in this room is a very rare occurrence. To aggravate the situation with high humidity can plumbing, which is leaking, as well as water pipes, on which the condensate settles.
• Mold does not like sunlight, but basically all the bathrooms in multi-storey buildings have no windows, the lighting in them is only artificially created. Sunlight does not get, so there are no obstacles to the development of fungus and mold.
• The fungus needs warmth. Most often, a bathroom is a small room where a heated towel rail is constantly working, and hot water is used. Low temperature in this room is very rare, which is great for molds.
• Microorganisms begin to multiply in dark, secluded places, and only then move to visible surfaces. There are a lot of such places in the bathroom.

Important! Often, a washing machine is a hotbed of fungal infection. The mold may be located on the back wall, inside, behind the rubber seal from the drum.

• The fungus is also important the lack of good ventilation in the room. If it does not work, then in the presence of heat, dampness, mold will appear over time.

Important! To check air circulation, bring a piece of paper or a lit match to the ventilation shaft. If they do not deflate, then - the air circulation in the room is unsatisfactory. Most likely, you will need to install a forced ventilation system.

to contents ↑

What is the danger of having a fungus?

First of all, this is an ugly type of room. Any decoration with the appearance of mold loses its original appearance. If the room is severely affected, most likely you will have to dismantle the tiles, make repairs again.

The main danger of the fungus is not damage to building materials and appearance, but the creation of a direct threat to the health of all residents in an apartment or house.Mold enters the human body in two ways - by inhalation of microparticles and by contact with the skin.

Microorganisms release toxic substances in the course of their life, which can lead to such diseases:

• Allergies of different types.
• Headache.
• Sinusitis.
• Asthma.
• Sinusitis
• Impaired liver and kidney function.
• Digestive system disorders.
• Joint disease.

Important! The fungus is very harmful for the elderly and children, as their body is weakened.

to contents ↑

How to get rid of the fungus on the walls in the bathroom?

How to treat the walls of the bathroom from mold and mildew? Before you start cleaning surfaces, you must select the materials and tools suitable for this. It is up to you to decide which remedy for mold and mildew on the walls in the bathroom to choose - a home-made product or a store product. You may need to use several different drugs.

The surface cleaning process consists of the following steps:

1. Remove the top layer of stains and fungal stains.
2. Dry the treated area with a building hair dryer.
3. Use antifungal medications.

Consider the most popular means and methods of struggle in more detail.

to contents ↑

Folk methods and means of struggle

The most popular home remedies are: vinegar and soda, ammoniahydrogen peroxide and others. Each of them has its own characteristics of use.

The use of soda with vinegar

There are two ways to remove mold on the walls in the bathroom using soda and vinegar.

First way:

1. Pour baking soda on horizontal surfaces.
2. Pour it with vinegar and wait 3-5 minutes.
3. Brush the surface.

The second way:

1. Make a slurry of soft consistency from soda and vinegar.
2. Apply to the surface - both horizontal and vertical.
3. Wait a couple of minutes.
4. Clean the surface.

Important! Soda is a good bleach and easily copes with dirt in the joints of tiles. After applying these methods, it is necessary to wash the surface with soap and a copious amount of water.

Use of ammonia

Liquid ammonia has a very pungent odor; observe safety measures when working with it.

The process of doing things:

1. Dilute ammonia with water in a ratio of 1: 1.
2. Apply to mold damaged areas.
3. Clean with a brush.
4. Rinse off with water.

The use of hydrogen peroxide

One of the effective and powerful tools in the fight against mold is peroxide:

1. Dilute hydrogen peroxide with water in a ratio of 1: 1.
2. Treat contaminated areas with the resulting fluid.
3. Rinse with plenty of water.

Peroxide also has a whitening effect, which is good when used on white walls and ceilings, as well as when cleaning grout between tile joints.

Important! If you have a colored grout, then be careful, hydrogen peroxide can change its color.

Use of copper sulfate

You can independently make a remedy for mold and fungus on the walls in the bathroom - the basis will be copper sulfate.

Phased steps:

1. Dilute 100 grams of powder in 10 liters of water.
2. Treat all contaminated areas thoroughly with the mixture.
3. Rinse off with water.

Important! When using this tool, observe safety measures - work with gloves and with a respirator. Ventilate the room after work.

The use of tea tree oil

Mild and gentle for humans is a way to clean tea tree oil. It does not affect human health, although it has a pronounced smell.

Cleaning happens like this:

1. Prepare the mixture, for this, dilute 2 tsp in 500 ml of warm water. oils.
2. Pour into a spray bottle, spray on the surface.
3. Rinse off this composition is not necessary.

Important! When using folk remedies, it is worth remembering that these are only temporary measures. These compounds cleanse stains and stains, but will appear after a while, because you need to eliminate the cause of the appearance of the fungus.To answer the question of how to get rid of the fungus on the walls in the bathroom, it is necessary to move on to more radical methods.

to contents ↑

Shop fighting products

In construction stores, a huge amount of antifungal agents is sold. Most often they differ in the method of application and the spectrum of action. There are funds in the form of aerosols, but there are those that are applied using a roller or brush. Some of the tools are safe for humans, and when using others, safety measures must be observed. First of all, you need to study the instructions.

Important! When choosing tools for mold, pay attention to what materials they are intended for - concrete, wood, brick or universal.

The most effective and popular samples of household chemicals that fight against similar microorganisms:

• MILLKILL.
• DALI.
• SZAVO.
• Atlas Mykos.
• “Titanium Fungicide”.
• Belinka.
• Astonish
• “Spectrum Fungicide”.
• Mellerud.
• Olympus Stop mold.

Using these funds, you can get rid of the fungus in the bathroom for a long time.

to contents ↑

Radical measures to get rid of the fungus

If mold on the walls in the bathroom is not removed either by folk remedies or by the store, and appears again after a while, it is necessary to use radical methods of struggle. This method will be a thorough repair in the bathroom.

Phased implementation of work:

1. Remove all trim and trim.
2. Apply a primer with antibacterial properties to the cleaned surface to kill the remains of the fungus.
3. Add protective agents to the adhesive and grout when laying new tiles.
4. Appropriate means treat the ceiling when painting.
5. Use high-quality sealant with antibacterial components when sealing joints.

This method provides an opportunity to kill the fungus forever and prevent the possibility of its reproduction. Ensure that the bathroom does not allow mold to appear again.

Prevention

To prevent the appearance of gray and black stains in the bathroom, it is necessary to take the following prevention methods:

1. Install forced ventilation in the form of an exhaust hood.
2. Ventilate the room after a long wash or bath.
3. Install a good heated towel rail to dry quickly.
4. Install a warm floor, which will both heat the room and dry the air.
5. Do not allow pipes and plumbing to leak.

Preventive methods are much simpler and more effective in implementation than the constant struggle with the consequences of the spread of the fungus. Consider all the factors of the appearance of this problem in the future until the moment you make repairs in the room.

to contents ↑

Stock footage

We examined the most popular methods on how to get rid of fungus on the walls in the bathroom. First, determine the cause of its appearance, and then eliminate it. Approach the fight against gray, black spots and stains carefully and competently, so that they do not appear in the future.