How to drain water from a washing machine if it breaks?

Washing machines have become so firmly entrenched in our everyday life that many are genuinely perplexed when the equipment suddenly fails in the middle of the wash cycle. The first thing that comes to mind in such a situation is: how to drain the water from the washing machine if it breaks down to get loaded and already almost completely washed laundry? And only after that we are already puzzled by whether it is worth calling the master to repair the malfunction or whether it is time to purchase a more modern washing machine for more convenient operation. How appropriate will be the cost in either case - you decide for yourself. And how to cope with the current problem that the washing machine broke down - how to drain the water, we will tell in this article.

to contents ↑

Output 1

If the sewer hose is in your field of view and is easily accessible, act to drain the washing machine if it breaks:

1. Prepare a large bucket if the equipment is far from a bathtub or sink.
2. Unplug the equipment.
3. Unscrew the connection point of the sewer hose to the machine.
4. Direct the hose directly into the bathtub, sink or bucket.
5. If possible, tilt the machine a few minutes later towards the drain to remove all water from the tank.
6. Open the drum door and take things out.

to contents ↑

Output 2

At the bottom of some models of this technique there is a filter drain plug, by unscrewing which water will completely pour out of the tank and you can open the door. In this case, you only need to consider the following:

1. Water will pour out quickly enough and its volume will be large. Therefore, place a rag on the floor, and if possible, substitute a container into which it will pour.
2. Be prepared for the fact that rags and containers will not save the situation and most of the liquid will be on the floor. You will then have to thoroughly wet to clean the floors.

Often the reason for the stop of the washing cycle is garbage, which you can take out through the same hole.

to contents ↑

Output 3

If there are special emergency pipes on the tank, you have to do almost the same procedure as in the first method, but in a slightly different way. After disconnecting the equipment from the network, it is necessary to reconnect the drain hose to these nozzles. This way you can drain the water from the washing machine if it breaks.

to contents ↑

Helpful hints:

1. Before you start any action and manually flush the water, look at the programmer. Perhaps the machine stopped the cycle because a pause or other buttons were accidentally pressed that led to this result.
2. Inspect the technique to see which emergency drain method is more convenient for you.
3. Remember to disconnect the equipment from the power supply before unscrewing the drain hose or removing the plug.

to contents ↑

Stock footage

We hope you successfully completed the task and were able to manually drain the water from the washer. And in order to exclude the occurrence of such a breakdown in the future, we recommend that you call the wizard in any case, so that he will diagnose and establish the cause of the malfunction.