Ardo washing machine - DIY repair

Even the most solid and high-quality household appliances sometimes fail. Today we’ll talk about what the Ardo washing machine most often sins with - do-it-yourself repair is in many cases possible. The features of this Italian unit are that the manufacturing company made sure that all the necessary components were available. This article is a guide to the home master, a guide for troubleshooting the most common problems.

to contents ↑

Breakdown Classification

All breakdowns that happen with any household appliances can be conditionally divided into 2 types:

• Typical. They are typical for all brands of washers - door jamming, problems with the drum or draining water.
• Rare. They are inherent in a particular brand of household appliance and, as a rule, are associated with some technological flaws. Examples are excessive filling of the drum with water, lack or complete lack of heating of the water.

Important! If we talk about the brand “Ardo”, then in about 90% of cases, masters meet with typical breakdowns of the unit. This suggests that the company's products are among the most solid and reliable household appliances on the market.

Some models are equipped with a special display that displays information about the breakdown, and self-diagnosis. If some kind of malfunction occurs, for the correct diagnosis it is enough to compare the code on the display with the reference table in the manual.

to contents ↑

The most frequent breakdowns

For Ardo washing machines with vertical loading, the following failures are characteristic:

• Water does not drain. This is most often associated with a ruptured hose or a clogged drain filter. Less often, water does not drain due to a pump breakdown.
• Lack of heating or insufficient heating of water. Most likely, the heating element is worn out and requires replacement.
• Electronics malfunctioning.
• The drum does not rotate. If the engine is in order, you will have to change the drive belt.

Over time, the appliance becomes clogged, so be sure to find outhow to clean a washing machine with vinegar. 

to contents ↑

Repair Rules

The most reliable way to eliminate the breakdown of the Ardo washing machine is to contact a professional craftsman. If you have experience repairing household appliances, you are confident in your own knowledge, then you can fix simple problems yourself. The main thing is to correctly diagnose a breakdown.

The simplest situation is when a fault code is displayed. Knowing which component is to be replaced, buy the original spare part in a company store (offline or online) or in a service center. Work only with branded components. The use of any fake will lead to even more serious consequences.

Important! Before starting repairs, disconnect the device from the power supply. After the back cover is removed, disconnect the wire that goes to the motor. Only then can the bolts be loosened and repairs started.

to contents ↑

The most common breakdown codes

Knowing these ciphers will help you quickly and timely “diagnose” the washing machine:

• E00, E01 - clogged drain filter. The problem is that the water does not leave the tank.
• E02 - the drain hose is not located correctly, so the water does not go away.
• E03, F4 - the pump is faulty. Because of this, water spills out too long.
• F2 - failure of the electronic module, temperature indicator or heating element.
• F5 - spontaneous drainage of water with a washer due to improper connection of hoses.
• F13, F14 - problems with the electronic board.

Important! If one of the listed codes appears on the display of the washer, except the last, the problem can be solved independently. For independent firmware of the electronic module, special knowledge and tools are needed.

Now we will examine in more detail each of the breakdowns and troubleshooting of the Ardo washing machine, and also find outhow to quickly clean the washing machine from mold and black fungus at home. 

to contents ↑

Blockage elimination, pump replacement

So, a malfunction is detected. If we are talking about ordinary clogging, then maybe you do not need to call the master. It makes sense to independently fix the problem, while saving money. The procedure for cleaning the drain filter is as follows:

1. Remove the front panel of the machine.
2. Spread a rag on the floor to drain any remaining water.
3. Unscrew the valve by turning it counterclockwise.
4. Remove the filter from the hole.
5. Thoroughly clean the filter of debris, rinse with running water.
6. Set the filter in place.

Important! The difficulty is that the plug can form not only in the filter area, but also in other areas that somehow come into contact with contaminated water: in the drain hose, nozzles or pump. The elimination of such malfunctions is associated with the need to disassemble the washer.

There are two ways to access the pump:

• From the bottom (put the washing machine on its side).
• Having previously removed the bar from plastic.

If the problem is that the drain hose is clogged, proceed as follows:

1. Pull one end of the hose out of the sewer pipe.
2. Disconnect the other end from the nozzle that connects the hose to the pump.
3. Clean the hose with a flexible cable with a brush, then rinse under the tap.
4. Operating in the reverse order, replace the hose.

If you are going to purchase a new unit, then check out our rated washing machines with dryer. 

to contents ↑

Electronics Troubleshooting

Replacing the control board is not difficult at all. Moreover, it is far from always necessary to completely change the module. Sometimes it is enough to repair the board.

Important! The cost of the electronic module is quite high. Its price sometimes reaches 30% of the cost of a washing machine. Often, many owners, not wanting difficulties with the repair, simply buy a new unit. Self-recovery board requires professional knowledge. Therefore, do not risk it. It is much wiser to invite a specialist.

to contents ↑

Bearing replacement

Repair associated with the replacement of seals and bearings is considered the most complex and time-consuming. The presence of repair experience and tools is required. Therefore, it is advisable not to mess with such a complex fix yourself.

to contents ↑

Replacing a heating element

If the washing machine does not heat water due to the fact that the heating element is worn out and burned out, then the heater must be replaced. Purchase a suitable heating element. Unsure of the right choice - take the advice of specialists. Next, follow the algorithm:

1. Using a tester, check the voltage at the heater contacts. During the test, do not forget to turn on the washer in heating mode.
2. If there is no power, check that the temperature sensor is working. You will have to perform 2 checks: at room temperature and after heating. To do this, pour hot water over the temperature sensor. If the resistance of the indicator is constant, the sensor must be changed.
3. Check the condition of the contacts of the heating relay. Sometimes the breakdown is associated with their jamming.
4. With normal nutrition, most likely the problem is in the heater, and it needs to be changed.
5. Disconnect the wires. Remove the bolt holding the heating element.
6. Gently rocking the heater, pull it towards you.
7. Clean the area where the water heater was located to remove any dirt.
8. Install a new heater. Connect the wires and the temperature sensor.

In the event that all our tips and tricks did not help you, and the device could not be repaired, you need to think about buying a new device. And our choice will help youtop loading washing machines rating. 

to contents ↑

Stock footage

As you can see, in most cases, do-it-yourself DIY repair of the Ardo washing machine with vertical loading is not such a tricky thing. The main thing is to adequately assess your strengths and decide whether you can do the repair yourself or is it worth using the services of craftsmen from the service center.