Hans's washing machine - error codes

German automatic washing machines manufactured by Hans are distinguished by their reliability and high class of components, assembly, which has been proven during use by many consumers. But like many other types of household appliances, Hansa units are not immune from malfunctions and breakdowns. On modern models of automatic washers, there is a display on which special symbols are displayed, indicating the occurrence of any defect. So, the topic of this article: “Hansa” washing machine - error codes of different models.

to contents ↑

Hansa PC error codes:

• E01 - code that is displayed when the door breaks and the load of the laundry tank is faulty. To eliminate this problem, it is recommended to replace the door lock and test the contact connections of the control system.
• E02 - this error code of the Hansa washing machine indicates a slow intake of water into the tank. It is necessary to check the water supply pressure and make sure that there are no foreign objects in the pipes and hoses.
• E03 - a character set that signals that water is draining for a long time from the tank. Inspect the drain filter and pump. If blockage is found, thoroughly clean the parts. If a serious breakdown is discovered, it is best to replace the part with a new one.
• E04 - this set of characters appears as a result of overflow of the hatch with water. The cause may be a malfunction of the water sensor or excessive pressure in the water supply. To solve this problem, you need to normalize the pressure in the pipes or replace the pressure switch with a new one.
• E06 - Notifies of a “sunroof” signal dysfunction. The cause of such a malfunction may be a blockage in the drain pipes or a defect in the control system. It is necessary to check the hoses for clogging, and also make sure that the control module is working.
• E32 - an error code is displayed in case of a dysfunction of the thermostat of the Hansa automatic washing machine. The connections of all the contacts in the temperature sensor and the control module should be tested.
• E42 - occurs as a result of blocking the door of the loading tank. The cause of this problem may be damage to the wires from the control system to the door, as well as damage to the lock of the loading door. To eliminate this problem, you need to test contact connections or replace the lock on the cover of your device.
• E31 - this combination appears as a result of a short circuit in the thermostat. These symbols occur when there are wire defects in the temperature sensor. Check all connections for damage, if any - replace the thermostat with a new one.

to contents ↑

Hans PA Error Codes:

• E04 - this error code of the Hansa washing machine indicates that the hatch has overflowed during washing. The cause of this problem is a water sensor malfunction or high pressure in the water pipes. Replace the pressure switch with a new one or normalize the water pressure during washing.
• E05 - notifies of a broken thermostat. This combination of characters occurs due to damage to the temperature sensor wires or dysfunction of the control system. Check all connections of the thermostat and control module.
• E14 - appears on the display as a result of a defect in the electronic controller. Often the cause of this error is a power failure.It is necessary to check the connection of the unit to the network. If the alphanumeric combination does not disappear from the display, replace the electronic controller. To further protect the machine from power surges, use network filters.
• E03 - occurs due to the fact that the water sensor did not generate an alert about an empty tank when draining water. The problem appears due to defects in the drain hose and pump. In addition, the cause may be a blockage in the drain pipe or filter machine. Blockage should be removed from the pipes, if any, replace parts if serious defects are found.
• E12 - an error appears due to the detection of a water leak in the machine sump. It is necessary to check the functionality of the Aquastop system and its contact connections.
• E08 - occurs due to the fact that the spin signal did not appear. It is necessary to check the tachogenerator and electric motor. If damaged, replace parts.
• E15 - Notifies the controller of a dysfunction. As a result of such a malfunction, the Hansa washing machine does not execute the specified programs. It is necessary to replace the electronic controller with a new one.

to contents ↑

Frequent malfunctions of Hansa washing machines

All error codes of Hans washing machines appear as a result of various malfunctions. In most cases, owners of Hansa equipment contact service centers for the following reasons:

• Dysfunction of the drain pump;
• Clogged drain filter;
• Defective bearings and seals;
• Thermostat malfunction.

Important! Often, users of washing machines experience situations where they plug traffic jams when they turn on the machine. What could be the reason and how to deal with it, we told in our separate review “Knocks the machine when the washing machine is turned on”.

If you are not confident in your technical skills, it is best to contact the master. He will advise you and very quickly bring your device back to life.

Important! Before fixing the malfunctions yourself, check the information on the warranty on the device in the documents so that your intervention is not a reason for refusing warranty service of the washing machine.

to contents ↑

Hansa Washing Machine Care Tips

In order not to contact the master for help and increase the life of the automatic machine, you need to perform certain manipulations:

1. Timely clean the drain filter from contamination.
2. The machine body must be cleaned with a soft sponge with detergent.
3. Once every six months, the drain pipe must be flushed.
4. The powder compartment must be kept clean. To do this, once a month it should be washed with running water.

Important! You will find more detailed instructions for caring for such equipment without too much time, money or effort in our separate review. “Prevention of the washing machine”.

to contents ↑

Stock footage

From this article, you learned the decoding of the error codes of the Hans washing machines, thanks to which you can recognize the cause of the breakdown and find out the need for repair. We wish you as little as possible to encounter problems with much-needed household appliances, and moreover, do not spend a lot of time and money on its repair.