Built-in refrigerator - cabinet dimensions

In some modern kitchen interiors, the lack of a refrigerator is surprising. All household appliances, including a dishwasher and a coffee brewing unit, are available, and the refrigeration unit is completely absent. The reason is that the equipment is “hidden”, or, as they say, mounted in a box. We will find out if there are differences between conventional and built-in units, how convenient the built-in refrigerator is, the cabinet dimensions should correspond to which parameters and characteristics.

to contents ↑

Built-in fridge - pros and cons

Most often, those who think through the interior of the kitchen with particular care prefer the integrated design. Sometimes a freestanding unit does not fit well with furniture, and creating a harmonious interior fails. In this case, the built-in construction helps.

Benefits:

• Profitability, since there is additional thermal insulation of the walls.
• Quiet operation (external panels protect against noise).
• “Invisibility”, which means harmoniousness of the kitchen interior.

Disadvantages:

• The volume of any integrated refrigeration equipment is less than that of a solo design. But from this he does not become less convenient.
• Relatively high cost.

Important! Information on how to choose the right place for the refrigerator, the dimensions of the cabinet for installation and other useful tips can be found on our portal in a separate article “Built-in refrigerator in the kitchen”.

to contents ↑

Application area

Choosing a built-in refrigerator, the dimensions of the cabinet to it, you must consider the following distinctive features of such models:

1. You cannot choose the design of a “solo” refrigerator according to a design or color scheme.
2. Kitchen design requires that the unit is not noticeable. White or steel-colored “cabinet” categorically does not suit you.
3. You are ready to reconcile with a smaller volume of the refrigerator and freezer, so as not to violate the harmonious design.

Important! There are cases when the built-in design does not suit you:

• The cooking volume is large, you need a large volume of equipment.
• The main thing you bet on is not the design, but the functionality of home appliances.
• Functions such as electronic control, a freshness zone, the ability to prepare soda, etc. are important to you.
• You are not ready to overpay for additional thermal insulation, saving is more important.

So, you have weighed all the pros and cons and preferred the mounted device. Follow the link to find out which company to choose built-in appliances.

to contents ↑

Integrated Technology Selection Criteria

An important point is the ergonomic design. The optimal height of the refrigerator is 1.5 m. If the height of the structure is less, then under it is convenient to place a cabinet for vegetables or kitchen utensils.

Sometimes equipment is installed under the countertop, 0.85 m high. In any case, it is necessary that the built-in refrigerator meets the following requirements:

• Reliability.
• Security.
• Simplicity and usability.
• Availability of access for cleaning and tidying up.
• Aesthetic design

to contents ↑

Sizing Rules

The height and width of the integrated unit must be correlated with the length and width of the niche where it will be placed:

• If the device is located directly under the countertop, then a special cabinet for the built-in refrigerator is not needed. The unit is installed directly on the floor between the cabinets, and the sash is fixed to the door.
• If you purchase a structure that is built into the box, then its dimensions are important, which are indicated in the passport of the refrigerator. TO

Important! As a rule, the width of the cabinet is 0.6 m and the depth is 0.55 m. The height can be different, depending on the modification of the refrigerator. The height is different, depending on the model of refrigeration equipment.

to contents ↑

Installation rules for the built-in refrigerator

Installation of the built-in refrigerator requires special knowledge:

• It is important to ensure electrical safety.
• It is also necessary that all nodes heating during operation be ventilated.
• Before embedding the unit in the box, you need to carefully study the manufacturer's recommendations specified in the instructions for the device. For different models, these patterns may vary. For this reason, it is necessary to verify the compliance of the cabinet with the requirements prescribed in the instructions for the refrigerator.

Sometimes owners of refrigeration units try to integrate a conventional model into a kitchen cabinet. This is not a good idea, since the life of the unit will be significantly reduced. A conventional appliance is not suitable for installation. Special models are designed in such a way that they feel great in a box or cabinet.

Important! Do not forget to pay attention to the top of the cabinet so that there is a 5-centimeter clearance for air intake.

In any case, it is necessary that the cabinet meets the following requirements:

• For the manufacture of the back wall, various materials can be used, except chipboard.
• There must be an excess of the dimensions of the cabinet under the built-in refrigerator over the dimensions of the equipment itself. For width it is 30 mm, for depth it is 120-150 mm, for length it is 80-90 mm.

Important! This makes it possible to ensure the correct movement of air inside the structure. The refrigerator is protected from overheating and will last longer.

• For the facade, the pantograph system is the best option. A good solution is special runners.
• The presence of two shelves: above and below the main compartment.

Important! In order for the equipment to serve for many years and satisfy all needs, you should carefully select the appropriate model. Find out what you need to pay attention to when choosing, in our separate post “The best refrigerators in terms of quality and reliability”.

to contents ↑

Stock footage

You need to trust the installation of integrated technology only to highly skilled craftsmen. The slightest inaccuracy is fraught with breakdowns and failures in warranty service. As for the design, the built-in models in the store do not shine with special beauty. The refrigerator takes on an aesthetic appearance after hanging an external decorative panel. And the style and design of this panel itself can be anything. Thanks to this approach, the device does not introduce any dissonance into the interior. The price of the built-in design is slightly higher than the solo, but this is offset by the convenience and ergonomics of the design.