How to wash tiles on the floor from stubborn dirt?

When planning repairs in the bathroom, no one thinks about the option of decorating walls and floors, but simply select the tiles according to the dimensions of the room and the style of decoration. Glossy tile has many advantages, including an aesthetic appearance. However, over time, under the influence of steam and soap, the facing surface loses its former attractiveness. How to wash tiles on the floor from stubborn dirt without stains and stains - an urgent issue for every housewife. There are many methods and tools that can cope with this problem, starting with affordable folk recipes and ending with effective household chemicals. Today we will consider the most optimal, but effective ways to deal with complex pollution.

to contents ↑

The nature of the formation of stains on the tile

Before starting to solve the problem of how to wash the tiles in the bathroom without stains, let's figure out why these contaminants are formed. This is necessary in order to choose the right tool for a particular type of pollution and, if possible, to avoid such problems in the future.

Strong and resistant tile is not afraid of almost anything. It repels water, tolerates extremes of temperature and steam. However, over time, the smooth surface of the tile loses its luster and attractiveness. The most acute problem is the appearance of stains on a smooth surface.

Common causes of various contaminants on the tiles are:

• Badly washed away dirt. This is a fairly common form of pollution. Dust, dirt, poor-quality cleaning leave stains on the surface of the tile. To wash such contaminants is difficult enough.
• Polluted water. During cleaning, it is necessary to change the water as often as possible, as it contains particles of dust, dirt.
• Dirty sponge or rags. During cleaning, the rags must be washed frequently under running water, otherwise the dirt contained on it and dust can leave an unpleasant trace on the tile.
• Hard water. If the water flowing from the tap has a high salt content, then after using it, whitish stains may appear on the tile. Most often, such problems are inherent in the bathroom. It is on the floor where moisture accumulates that such defects appear.
• The use of detergents. Very often, after the use of detergents and cleaners, traces of stains remain on the glossy surface of the tile.

In order to qualitatively wash the tiles in the bathroom, it is necessary to take into account the nature of pollution, the nature of the room, choose the right products and adhere to a certain sequence of actions. Let's figure it out in order.

All dirt tiles can be divided into the following groups:

• Limescale coating.
• Fungus, mold.
• Other contaminants (dirty drips, traces of detergents, greasy stains).

To cope with these contaminants, it is necessary to choose the right specialized products that will not only effectively remove all stains, but also return the gloss to the tile.

to contents ↑

Limescale control

Unfortunately, the water quality in our homes is such that nobody succeeds in avoiding the problem of limescale.So that in the bathroom or in the kitchen the tiles always shone and had an attractive appearance, it is better to use specialized ceramic care products. Each composition of household chemicals is developed to eliminate a specific type of pollution or as a universal tool for eliminating all types of stains.

The most common remedies:

• "Silt Bang." One of the most effective means that can cope not only with limescale, but also rust, as well as soap scuffs. The composition of the drug perfectly breaks down fat, gives the surface a shine.

Important! The drug is suitable for both tile and plastic, stainless steel, glass.

• “Domestos”. It is best to use a variant of the agent in the form of a spray, due to its convenience and ease of use. The drug copes with any type of pollution, including mold in the initial stages.
• "Mister Muscle". The composition of the drug copes with fat deposits, soapy, calcareous deposits. During cleaning with this composition, almost no stains are formed on the surface.
• “Comets”. The widely advertised brand produces a wide range of products for cleaning the bathroom, toilet and other premises. Spray from this manufacturer effectively copes with plaque and gives any surface shine. The tool perfectly removes grease, dirt and other impurities.
• Amway. The drug is an excellent assistant in the fight against fat, dirt and any kind of stains. Including efficiently and quickly help to clean the tiles on the floor from stubborn dirt.

Important! All special products contain aggressive chemical components, so do not forget about safety and work with drugs only with gloves on.

Advice:

• Buy products only in those stores that are well established and have long been on the market. In kiosks and in the market, there is a greater likelihood of being faked and buying low-quality goods.
• When buying a drug, pay attention to the packaging. In original products, packaging is always neat and without flaws. Inspect the label carefully. All labels should be legible and the label itself should be bright.
• Use a popular melamine sponge to control plaque. With this effective tool, you can wash the tiles in the kitchen. It is enough to wet the sponge and rub in the places of pollution.
• To clean the ceramics, use liquid and gel formulations that will not damage the tiles. Use soft washcloths, microfiber cloths, wafer and terry towels made of natural fibers, toothbrushes for work.
• Do not use detergents in the form of powder to clean the tiles, as they can damage the surface of the tile. For cleaning ceramics, coarse brushes, metal washcloths, toilet detergents, detergents for washing dishes, cleaning products for sinks and stoves, and acid-based detergents, as well as acid-containing detergents, can not be used, since all this destroys the tiles.

The fight against plaque folk remedies

Many owners fundamentally do not want to use special tools because of their aggressiveness and insecurity for human health. For adherents of folk remedies, we offer the following recipes that will help you quickly and effectively cope with plaque and give tile shine. Here's what you can wash the tiles on the floor from stubborn dirt:

• Lemon juice. Squeeze juice from citrus, dilute it with water, and wash the walls and floor with this mixture.

Important! Instead of a natural product, citric acid can be used. Dilute the acid in warm water, and wash the tiles with this solution. In addition to cleanliness, you will get freshness and wonderful aroma in the bathroom.

• Table vinegar. Dissolve 3 tbsp. tablespoons of vinegar in 1 liter of water. Pour the solution into the spray bottle and treat the facing surface with the composition. Repeat treatment once every 2-3 minutes. After several applications, wipe the surface and enjoy cleanliness.

Important! Vinegar also effectively fights mold and prevents its appearance and development with regular use.

• Ammonia. A solution of ammonia is very often used when cleaning glasses, but it is no less effective in cleaning tiles. Put a solution of ammonia (1 tablespoon of alcohol per 1 liter of water) on the surface, after a few minutes, wipe the tiles. Alcohol dissolves plaque well, and the property of ammonia to give the surface shine has long been known to all housewives. The only drawback is the unpleasant odor, so work in a respirator and ventilate the room well.

Important! For severe contamination, use a stronger solution - ammonia. In terms of effectiveness, this method will give odds to many specialized formulations, but it is impossible to work with ammonia without a respirator.

• Chlorine Previously, cleaning floor tiles at home was carried out using ordinary bleach. Compositions based on bleach are most often used for white tiles. Work with unpleasantly smelling powder is necessary only with gloves.

Important! The composition helps to cope with any pollution, kills all microbes and prevents the formation of fungus and mold.

• Baking soda + vinegar. If we are talking about old limescale and stubborn dirt, then this is the most effective option. In order to wash the tiles in the bathroom, first apply soda soaked in water to the surface, and then pour vinegar on top. The rapid reaction of the components perfectly cleans the tiles.
• Soda + hydrogen peroxide. To remove dirt in the joints between the tiles will help a good tool consisting of soda and hydrogen peroxide. Pour soda into the container, dilute it with peroxide to a paste. Apply the mixture to all contaminated areas, and after 10 minutes, wipe the surface with a sponge. Peroxide paired with soda do real miracles.
• A piece of chalk. To clean the glossy surface of the tile, rub the paper with chalk and process the tile. It is not necessary to wash off chalk.

to contents ↑

Mold control

If black spots appear in the bathroom, you will have to make a lot of effort to remove them, since this is mold.

Important! It is necessary to deal with the fungus immediately, since over time the problem will reach enormous proportions, then you will have to remove the entire lining and conduct numerous antiseptic treatments.

The causes of mold may be:

• High humidity in the room.
• Accumulation of dirt in the joints between the tiles.
• Lack of systematic care using antiseptic drugs.
• Systematic contact of tiles with water and high temperatures.

If the problem has not gone too far, then you can use antifungal solutions to clean the joints between the ceramic base. Apply the product for 30 minutes, and then rinse the area well with clean water and wipe it dry. If there is no special cleaning composition at home, then use bleach (1 part means for 10 parts water).

But to completely get rid of the problem, use the following effective methods that have proven their effectiveness over time:

• Steam cleaner. This is the most reliable solution. At high pressure, a special unit delivers steam and removes fungus, mold and their spores from the surface. Using steam, you can quickly and easily remove mold from any surface.
• Chlorine Previously, the familiar bleach was used with fungus. Its ability to kill bacteria and harmful microorganisms is exactly what is needed to completely remove the fungus, if its spores do not penetrate deep into the surface.
• Soda ash. Apply grout and use a brush to remove all plaque from the surface. This process is long and complicated, but if you decide to get rid of the fungus, you will have to make a lot of effort and spend a lot of time.

Important! All fungus removal work is carried out exclusively with protective gloves.

If all of the above remedies did not help get rid of the mold, then you will have to completely replace the old grout.The grout replacement process is as follows:

1. Remove all infected grout. This process is best carried out with a special tool with interchangeable blades.
2. Clean out the rest of the composition with a stiff brush. Use a powerful vacuum cleaner to remove as much dirt as possible.
3. Treat stitches with an antiseptic. Apply the product inside to get the drug on all surfaces.
4. Allow the composition to dry.
5. Apply fresh puffer to the seams and rub.

Important! Change the grout at the seams every few years to prevent the appearance and development of the fungus.

to contents ↑

How to wash the tiles in the bathroom? Step-by-step instruction

To make the tile surface shine clean, follow the order of events:

1. Sweep large clogs from the surface.
2. Use a dry cloth to collect dust particles from the lining.
3. Prepare a soap solution using laundry soap or dishwashing liquid.
4. First wash the dirt off the surface with soap and water.
5. Rinse the tile with clean water.
6. Put on the tile a tool to remove serious contaminants (limescale, grease, traces of stains, tribe). Use a spray bottle for this purpose.
7. Leave the surface for a few minutes for the product to work.
8. Rinse off with clean water and a rag.
9. Treat the tiles with glass and mirror care products and rub them with a dry cloth to give the surface a shine.

to contents ↑

How to wash the tiles on the floor so that there are no stains?

The floor in the bathroom and the kitchen requires special attention. Water spills on it, drops of soapy solution fall. Food and grease marks are often found on the floor in the kitchen. All these contaminants, along with dust, leave dirty stains on the floor. In addition, dirty, slippery floors can cause injuries. Therefore, try to wipe the floor immediately after water and other impurities get on it.

If the floor surface is too dirty, proceed as follows:

1. Moisten the floor and sprinkle soda on it.
2. Rub the product with a brush.
3. After a while, spray the vinegar solution.
4. Remove the remaining funds with a rag (mop).
5. Wipe the floor dry.

Important! Very often, the space between the tiles is filled with dirt. To remove dirt, wipe the seams with toothpaste and a brush. Dampen the bristles of the brush and squeeze a little paste on it. Spread the paste at the seams and then rinse it off with water and a sponge. Cleaned and dried seams can be coated with acrylic paint. She will create a film and will not allow dirt to soak into the solution.

to contents ↑

How to prevent problems?

If you do not want to rack your brains every time on how to wash a tile in the bathroom to restore its shine, follow simple recommendations:

• Wipe the tiles regularly with a damp cloth, as fresh plaque is easily removed without any means. Clean more often those areas that come into contact with water, then there will not be a problem with limescale for a very long time.
• Be sure to install a fan in the bathroom so that it forcibly draws out moist air. If there is good ventilation in the bathroom, then there will be no dampness in the room, which, together with high temperature, is an excellent environment for the development of fungus and mold.
• Thoroughly clean the facing surface once a week using specialized preparations or folk remedies, which we talked about above.

to contents ↑

Stock footage

Clean the tiles periodically using high-quality and effective products and then the problem with plaque, and even more so with the fungus, will never appear. We hope that our tips and tricks helped you get rid of unsightly whitish stains on the tiles, and now the bathroom shines with brilliance and cleanliness.