Carpet cleaning Vanish at home
Carpet is a beautiful and luxurious element of decor. At the same time, it is the most vulnerable place for pollution in the room. Household pollution and dust over time make its surface dull and unattractive. Is there a way to get rid of dirt on the surface of a carpet product without putting much effort into it? Consider how you can clean it using modern household cleaning products. In particular, this is cleaning the Vanish carpet at home.
to contents ↑What is Vanish?
This is a universal cleaner for removing any stains from any kind of carpet. “Vanish” is produced in such forms.
- Powder.
- Spray.
- Shampoo.
You can use the product for coatings with any kind of pile (including long pile) and any color. The main advantages of the drug are its effectiveness and wide scope.
to contents ↑Important! You may also be interested in several interesting design techniques for decorating living rooms described in our article. "Carpets in the interior".
A brief description of the different types of Vanish
Which of the means is more preferable for you, you will understand by reading the instructions. To make the choice more informed, consider the main types of cleaning products.
Powder
This is an extremely simple and effective tool. It is enough to apply it to the surface, withstand the right amount of time, and then vacuum the carpet. The powder absorbs and removes dirt to the surface of the product.
Spray
This tool is effective immediately after the occurrence of the stain. The spray is sprayed onto the contaminated area and left for the time provided for in the instructions. The remnants of the cleaning agent are removed with a sponge or clean cloth.
Shampoo
Before buying a shampoo of one kind or another, carefully read the instructions. Some shampoos are designed to be cleaned with a vacuum cleaner, while others are designed to clean a carpet product by hand.
How to wash a carpet at home: general recommendations
To achieve a good effect and not to exert unnecessary efforts, you must adhere to the following recommendations:
- It is advisable to start cleaning the coating from the inside of the product so that the dirt does not clog into its front part.
- Before cleaning, it is necessary to collect all the dirt under the carpet, and then vacuum the coating from the inside and the front.
- Remove stains from the edges to the center.
- Stains should not be rubbed, as dirt penetrates deeper into the fibers.
- In order not to disturb the structure of the carpet, the detergent should be collected along the pile.
- Do not use too much cleaning solution. If the carpet does not dry completely, the fibers may rot and cause unpleasant odors.
- At the end of wet cleaning, the carpet product must be thoroughly dried. To do this, it is deployed with the wrong side up and kept until the water has completely dried.
Important! If you have carpets in every room and even the hallway, and you still haven't got a vacuum cleaner, there is reason to think about buying it.
Our help will be yours review of the best vacuum cleaners.
What does it take to clean the carpet by Vanish?
To make carpet cleaning “Vanish” at home efficient and quick, you will need to work:
- Foam sponge.
- Brush: soft or medium hard.
- White fabric that absorbs water well.
- A vacuum cleaner.
- Gloves made of rubber.
Procedure
Carpet cleaning “Vanish” is performed according to this algorithm.
Training
Vacuum the carpet on both sides. If possible, knock him out on the street. This will avoid the appearance of new spots.
Preparation of cleaning solution
To learn how to breed “Vanish” for carpet cleaning, read the instructions first. Using the instructions, dilute the product in water, mix well and beat until foam appears.
Important! It is foam that is the main cleaning component. The cleanliness of the carpet depends on how you beat it.
Product cleaning work
There may be two options:
- Vacuuming. Spread the moistened Vanish powder over the carpet, leave for half an hour. Then collect the detergent with a vacuum cleaner.
- Manual cleaning. Apply foam to the surface with a brush or sponge, evenly distribute it. Leave the foam on the carpet for 1-2 hours, depending on how dirty the product is.
Important! The interaction of detergent with dirt depends on the type of pile, the material of manufacture and the degree of contamination of the coating. The foam should dry well!
Vanish Carpet Cleaning: Removing Detergent
It is convenient to remove the remaining “Vanish” with a vacuum cleaner. In this case, do not put too much pressure on the brush. Collect foam along the pile, and do not forget to thoroughly dry the carpet after cleaning.
Important! “Vanish” is not suitable for cleaning coatings made of natural fibers. It successfully works with artificial and blended fibers. Foam does not clog into the pile and effectively removes dirt.
Some useful tips
These tips will help you figure out how to clean the carpet at home:
- To keep the flooring clean, you need to vacuum the carpet at least 1-2 times a week.
- Before using chemicals, test them in an inconspicuous area of the product.
- Fresh spots are removed easier than old ones, therefore it is advisable to deal with spots immediately after their appearance.
- Work with chemical cleaners and detergents in a well-ventilated area.
- Remove product residue carefully to avoid allergies.
- Do not use “Vanish” for products with unstable coloring, as new stains may appear.
- At the end of the carpet cleaning, “Vanish” carefully inspect the carpet for wet areas. Absorbing wet areas will help with moisture-absorbing tissue and a regular hair dryer. In this case, it is necessary to act not with hot, but with cold air so that the pile does not deform.
to contents ↑Important! In winter, you can effectively remove dust and dirt from such a decorative coating without the use of household chemicals. Find out, how to clean the carpet with snow.
Stock footage
Use “Vanish” exactly with the instructions given, and you can achieve a good result, while saving physical strength and time.
(No ratings yet)
Loading...
