How to get rid of mold in the bathroom?

A beautiful bathroom is more than just expensive tiled walls and a design decision. In fact, the most important factor is cleanliness and grooming, which are very difficult to achieve. Because of the increased humidity, very often a fungus can settle here and every housewife sooner or later wonders: “How to get rid of mold in the bathroom?” Fungus is not just an aesthetic problem, it is harmful to your health and the health of your family. In this article we will tell you what measures to take to avoid the appearance of mold, and how to get rid of it if it still appeared in your bathroom.

to contents ↑

Causes of mold

The fungus that appeared in the bathroom is a very common situation. It is necessary to fight him without delay.

Important! Mold is a fungus that has several types: blue stain, mold fungus, yeast, rotting fungus. The most common of all types of mold is black. It is very dangerous both for your health and for your bathroom for the reason that it eats deep into the thickness of the walls, gradually completely destroying them.

There are several reasons for the appearance of the fungus:

1. Lack of proper ventilation in the room.
2. Violation of the rules when performing finishing work.
3. Lack of proper heating.
4. The use of moisture resistant materials.

Important! Also, the main reason why mold appears in the bathroom is the ideal conditions for its living: high humidity (90-95% with a permissible 70%) and air temperature of about 20 ° C.

to contents ↑

Prevent the appearance of fungus

So that you do not think about how to deal with mold in the bathroom, try to do everything so that it does not appear. Start by removing the root cause of this disaster in your bathroom — excess air humidity.

For this:

1. Ventilate the room regularly.
2. After taking a shower, wipe the walls and dry the bathroom.
3. Provide adequate ventilation.
4. Try not to dry your laundry in the bathroom.
5. Take care of the plumbing system in time and monitor the condition of the flooring.

It is also important to follow these tips to get rid of mold in the bathroom:

1. Provide good heating, avoiding overcooling of walls.
2. For repair, use antiseptics and materials intended for rooms with high humidity.
3. Wipe the surfaces once a month with a chlorine-based solution.

to contents ↑

Bathroom mold removal

If you could not avoid the appearance of mold, then at the first sign, start a fight with it.

First signs of mold

If at the next cleaning you notice an uncharacteristic black, gray or marsh green coating that is not characteristic of dirt, touch it. The mold is soft and porous to the touch. Usually it appears in places where the humidity is constant - under the bathtub, in the shower or near the washing machine.

If you are not sure if this is mold, smell it. The fungus has a specific smell that you will not confuse with anything - the smell of dampness that is present in the cellar or basement.

Important! As soon as your suspicions are confirmed and you have a fungus in the bathroom, immediately take active steps to get rid of the uninvited neighbor.

to contents ↑

How to get rid of mold?

There are many ways to combat mold. All of them can be divided into 2 groups: modern and traditional. The first are professional antiseptics and chemicals that have appeared on the market quite recently, the second are folk methods of struggle.

to contents ↑

Modern methods of struggle

Many manufacturers of varnishes and paints produce special anti-mildew products in the bathroom. They can easily be found on the shelves of building supermarkets.

There are several directions for the production of such chemicals that differ in their basic component composition.

Blue vitriol

Easy enough to use, but toxic, so wear a respirator and gloves. For use :

1. Dilute copper sulfate as described in the instructions.
2. Lubricate the affected area with a thick layer of this mixture. Apply it with a brush.
3. After a few hours, wash, dry and ventilate your bathroom.

Chlorine bleaches

Such products are a good answer to the question of how to clean mold. The only drawback of such bleaches is the pungent odor, so it is recommended to work in a respirator.

To clean you will need:

1. A solution of bleach and water (10: 1).
2. A rag, spray or sponge for applying the mortar.

You must act like this:

1. Apply the mixture to the affected surface. No rinsing is required, as the bleach will prevent mold from forming again.
2. Ventilate the room.

Antiseptics

If you decide to use special medications to get rid of mold in the bathroom forever, take note of the following remedies:

1. The antiseptic composition “Antifungal”, which is successfully used for repair work and for the detection of fungus. The solution is applied to almost any type of surface: plaster, concrete, wood, brick. The advantage of this drug is that it is not toxic.
2. Another remedy for fungus in the bathroom is a series called “IZOCID”. Removes microalgae, blue stain and other microorganisms that breed in bathrooms. IZOCID is also a good base for water-soluble paints.
3. The antiseptic “DALI” is suitable for treating both foci of the fungus and for preventive maintenance. It is also safe for people and animals, but it is also effective in cleaning.

Ready-made solutions and mixtures

Ready-made means for the destruction of the fungus everywhere and at all stages. One such remedy is the MIL KILL latex emulsion, which contains antimicrobial agents that prevents the appearance of fungi. This emulsion is perfect for treating leaks and products that are in places with high humidity. Despite the fact that “MIL KILL” kills the fungus, it is completely safe for humans.

Important! When purchasing finished products, in order to clean the mold, ask the seller which tool is best to choose in your case. This is due to the fact that mold on the ceiling or walls is destroyed by various means.

to contents ↑

Traditional methods of struggle

Although the market provides a ton of advanced chemicals to clean mold, they are not for everyone. For people with respiratory diseases, allergic to chemicals, folk tips for solving the problem will be useful.

Method 1

1. In 2 glasses of water, dilute 2 tsp. tea tree essential oil.
2. Use a spray gun to apply to the surface.

Important! Rinse off this product is not necessary. Use it better before night so that no one afterwards takes a shower or bath.

Method 2

Black mold in the bathroom is perfectly removed with baking soda, slaked with vinegar. For cleaning:

1. Put soda on the affected surface.
2. Pour vinegar.
3. After the foam has settled, rinse with warm water and a detergent or soap.

Method 3

1. Take 4 parts of water, 2 parts of hydrogen peroxide and table vinegar and 1 part of boric acid.
2. Mix them.
3. Wipe the affected surfaces with the mixture.

Important! With such an effective tool, you can forever get rid of mold in the bathroom.

Method 4

If you are interested in how to remove mold safely, then this method is for you:

1. Dissolve a glass of borax in 2.5 l of boiled warm water.
2. Clean the surface and apply the resulting solution with a paint brush.
3. Remove excess moisture with a tissue.

Method 5

Anthracene oil - protects the surface from fungus, is not susceptible to moisture, but has a persistent unpleasant odor. Therefore, after processing the walls or plumbing with this tool, be sure to ventilate the room.

to contents ↑

Radical methods of struggle

Unfortunately, the mold remedies in the bathroom that are listed above do not always help. There are so neglected cases that you have only one thing left - repair. This is also the most effective method. During repair, it is recommended to use different antiseptic agents. And only after you have made sure that you have destroyed the hearth itself - the mycelium of mold, it will be possible to whiten, paint or lay the tile.

Important! So that all your efforts are not wasted, install a special door with ventilation.

to contents ↑

Stock footage

The above methods will help you get rid of mold for a period of time. But whether it appears again depends only on how often you will carry out prophylaxis in order to prevent the occurrence of this unpleasant phenomenon.