How to clean the seams between the tiles in the bathroom at home?

The pleasant appearance of the tiles in the bathroom and kitchen always adds a good mood and makes the house cozy. But all this can be disturbed by browning, dirt, mold, fungus and other unpleasant phenomena. Therefore, it is extremely important to know the reasons for the darkening, and how to clean the seams between the tiles in the bathroom at home. These are the questions we will reveal for you in this article.

to contents ↑

What is the chemical method for cleaning tile joints from contamination?

This is their commonplace cleaning using innovative detergents. But their use is somewhat limited, since they quite easily cope with various smooth surfaces, but not with rough, porous, which, in essence, are the seams between the tiles.

Dirt eats into them, and all modern household chemicals are weak in this matter, especially when it comes to loyal household chemicals. If you want to try your luck and clean the seams between the tiles in the bathroom at home with the help of such tools, then look for better potent solutions. They should be based on strong acids.

Important! Among such household chemical solutions, pay special attention to the good old “Pemolux” - the effectiveness of this tool has been tested by time. No less effective will be Silit.

All chemicals are used in the same way:

1. Applied to the seams.
2. Maintained so that all the elements do their job.
3. Then the seams are washed with warm running water.
4. In order to increase efficiency, you can additionally use a brush.

Important! By and large, chemistry works, but there is an effect from it only when the pollution has not yet had time to finally penetrate the grout structure itself. That is why this care of the tile, or rather the seams between it, must begin precisely from the beginning of the operation of the tile. That is, do not bring everything to a critical state, but periodically take a suitable product and use it to wash the seams between the tiles in the bathroom.

to contents ↑

How to wash tile joints? mechanical methods

The mechanical way to solve this issue is more effective, because it does not matter for him how deeply the pollution has penetrated the weld structure. You simply pick up a scraper, and then gradually, millimeter by millimeter, clean off the top layer of the seams along with the dirt.

Yes, the work is somewhat difficult, tedious and very painstaking, but incredibly effective. But you need to do everything with your own hands, this is the main disadvantage of this method.

If we talk about those devices with which you can perform a similar procedure, here you can note the following suitable tools:

1. Sandpaper or a kitchen scraper. Universal devices, but you will work with them more than one day.
2. To clean the seams between the tiles on the floor, you can use non-rigid brushes for metal. But be aware that they remove the grout with strips that are very noticeable.
3. The best in practice is a small semicircular chisel, which is usually used by wood carvers.If there is no finished product, it is enough to simply make it from a thin tube, cut it in half and grind the edge on the grinder.

Important! It is not recommended to fully mechanize this cleaning method and use all kinds of nozzles on the drill. The only thing you can achieve in this way is to damage the tile enamel.

to contents ↑

Traditional methods in the fight against pollution at tile joints

In most cases, methods of folk origin are always more effective than modern cleaning products. Cleaning the joints between the tiles with their help is complex and simple at the same time. As a rule, it is a mixture of chemical and mechanical technologies, which at the same time allows you to clean the seams between the tiles in the bathroom, as well as bleach them. But despite this, you still have to sweat a little if you want to get an excellent result.

Mud seam recipe

This solution can be prepared from ordinary baking soda, vinegar and lemon. His recipe is very simple - 6 tbsp. water, ½ tbsp. soda, ⅓ Art. vinegar and as much lemon juice.

Mode of application:

1. Apply the prepared liquid to the seams.
2. Give her 10-15 minutes to stay at the seam so that the resulting solution does its job.
3. After that, all contaminants are easily washed off with clean running water.

Important! It is possible to increase the effectiveness of the impact of this homemade solution with a brush, it will help your solution to quickly penetrate into the grout. Repeat this procedure 2-3 times to surely clean the seams between the tiles in the bathroom at home from all the dirt.

to contents ↑

Cardinal seam cleaning

There are such contaminants that cannot be eliminated by the methods described above. As a rule, this is a long-standing pollution with traces of mold, as well as other sewage - it does not make any sense to deal with such phenomena. Especially with mold.

It is best to destroy such contaminants using cardinal methods. For this:

1. Frozen grout will have to be fully and completely picked out.
2. Treat the seams with a special primer, for example, Ceresit CT 99.
3. Then apply a new grout, which you prepare with the addition of a primer.

Important! The situation is facilitated by special devices, for example, scrapers, direct use, which boils down to eliminating glue from the joints, but they can cope with grouting quite effectively. At its core, it is a handle on which a wide diamond-coated blade has been attached; each blade is 1.5 mm thick.

If your seams are wider, then install several blades on this machine. Although you can do just one, in this case, set the knife a little diagonally.

to contents ↑

The way to protect inter-tile joints from pollution

Applying grouting materials to the joints is a rather time-consuming task, because manufacturers insist that the protective mixture does not fall on the tile itself. According to them, in those places where the tile is in contact with the liquid, spots form.

But there are special mixtures to protect the grout from pollution:

1. The innovative ATLAS DELFIN product can be called a bright representative of these products - it slightly embellishes the white seams with a yellowish tinge.
2. Ceresit CT 10 Super is an excellent product from a renowned German manufacturer, the reliability and decency of which is beyond doubt.

Important! White grout is considered universal. But if you do not want to regularly resolve the issue of how to clean the seams between the tiles, do not use it in the bathroom. Contrast seams also look very beautiful, in addition, snow-white tiles in such rooms are incredibly rarely used, so replacing a white grout with some other is quite simple.

to contents ↑

Stock footage

We hope that now the tile joints in your bathroom or in the kitchen will be in excellent condition and comfort will reign in your home, which you tried to create.