How to wash windows without streaks at home?

The question of how to wash windows without streaks at home is of interest to almost every modern housewife. Indeed, clean windows without streaks not only allow more light to enter the room, but also make it more cozy and comfortable.

Today, plastic windows are firmly rooted in the market for such products, and have successfully replaced the old unreliable wooden frames. Without exception, we all know in theory how to wash windows, but we do not always do this correctly in practice.

In our article we will tell you how to wash plastic windows without streaks at home, what is more convenient to do and what is the most effective tool.

to contents ↑

How to wash windows? Required Inventory

To simplify the process of cleaning window frames and spend less time and energy on it, prepare the necessary tools in advance.

Important! On average, wet cleaning of plastic frames should be done every three months. Dust and dirt adhere faster to the windows of first-floor apartments and private houses, especially if the wind is constantly blowing around the building. Therefore, cleaning profiles and glasses can be done even more often or as needed.

Sponge

Prepare the sponge with which to apply the detergent. Choose one in which one side is hard. With it, you can remove persistent dirt.

Wiper or screed

Purchase this appliance from a hardware store to clean your windows without streaks quickly. With it, washing windows will bring only pleasure. Manufacturers produce wipers with retractable handles, so you do not have to constantly climb into a chair.

Important! For better convenience, you can purchase a 2 in 1 wiper. In this device, there is a sponge on one side and a screed on the back. Using such a tool, the window cleaning process will significantly decrease in time.

Detergent

Depending on the complexity of surface contamination, choose a window cleaner. Properly selected detergent will speed up and facilitate the cleaning process.

Dry cloth

A clean, dry rag will be needed to wipe away any moisture from glass surfaces. It is best to use a rag to clean windows without streaks of cotton, linen, suede or another type of material that absorbs water well.

Bucket or basin for water

Prepare a water tank. It should be spacious enough and comfortable for rinsing the sponge. Make sure the bowl or bucket is clean before using it to clean glass.

to contents ↑

Preparing window openings before cleaning:

• Before you start cleaning the glass from dirt and dust, remove flower pots, vases, appliances and other foreign objects from the windowsill.
• Put the accessories that you need for cleaning so that it is convenient to get them out.
• Do not pour a lot of water into a bucket or basin; in the process, it can spill around. Yes, and it is better to change the contaminated water as necessary, in order to wash windows without streaks at home in a quality manner.
• Prepare a glass cleaner outside and a separate sponge.Outside, the surface of plastic and glass is more susceptible to contamination.
• It is better to wash windows in cloudy weather. In the sun, the product dries faster and will need to be applied again and again. And stains in bright light are poorly visible.

to contents ↑

How to wash windows at home without stains?

If you have painted wooden windows, they should be washed using only liquid products, so as not to damage the material and the painting of the frame. PVC can be cleaned with powders, if the material in the basis of window structures is of high quality.

Soap solution

The most common and lightest means with which you can solve the problem of how to wash plastic windows at home without streaks is soap solution. Depending on the resistance of contaminants to the surface, different concentrations of soap in water can be used.

Mode of application:

1. Dilute a small amount of soap in warm water. For external cleaning, you can use laundry soap.

Important! Do not use detergents with aggressive components or hard washcloths to clean plastic frames. Plastic is very sensitive to mechanical damage.

2. Dampen a soft sponge or wiper in the product.
3. Apply the solution to the surface of the glass and frame. For the best effect, you can leave the product for a while, so that the mud completely dissolves.
4. Wash away soap residue with a clean cloth.
5. Use a scraper or soft cloth to remove any moisture.
6. Use a crumpled newspaper to remove stains on the glass.

Important! If the pollution is very strong, some places can be pre-rubbed with soda. But do not use soda to wash the wooden balcony frame; the coating may lose its color.

Ammonia

Ammonium is almost always in the home medicine cabinet. It can be used as an excellent tool to clean windows without streaks.

Mode of application:

1. Add ammonia in warm water in a proportion of 2 tablespoons per 1 liter of water.
2. Use a soft sponge to apply the solution to the dirty area of ​​the window frame.
3. Rinse off any remaining fluid with clean water.
4. Dry the window with a moisture-absorbing cloth.

Important! Ammonia will not only easily remove dirt from the glass, but will also give additional shine to the surface of the glass and plastic.

a piece of chalk

Have you been looking for a means for a long time, than to wash windows so that there are no stains at home? Chalk will help you with this. It will perfectly cope with any dirt on the surface of the window. This method has been tested for years, and experienced housewives always use it in the cleaning process, despite the laborious cleaning process.

Mode of application:

1. First, the chalk should be crushed to a powder.
2. Dissolve chalk in warm water in a proportion of 2-3 tablespoons per liter of water. Stir thoroughly so that no grains remain.
3. Moisten a sponge in the chalk solution and apply to the contaminated surface.
4. Leave the product to dry a little.
5. Use a crumpled newspaper to rub the balcony frame.
   

Professional tool

To quickly wash the windows in the apartment, use a special tool for this. In the department of household chemicals, a huge range of professional cleaners for windows and plastic surfaces is presented. Liquids can effectively cope with the most persistent traces of dirt without harming the plastic and leaving no streaks on the glass.

Important! Before using special products on the product, carefully read the instructions and determine for which surface it should be used. Strictly observe the indicated proportion during the cooking process.

to contents ↑

How to wash plastic windows quickly and without streaks? Cleaning Steps:

1. You should start washing windows with plastic, then proceed to remove dirt from the glass.

Important! It is undesirable to wash the windows in the reverse order, the detergent will fall on the glass, stains will appear, so cleaning will have to start again.

2. After processing the frame, moisten a clean sponge in a suitable product and apply liberally to the glass.
3. You need to wash the windows from top to bottom so that the dirt flows down the surface.
4. Thoroughly wipe the window around the perimeter, in the joints between the frame and the glass the most dirt is collected.
5. To wash the window frame from the outside, use the soft side of the wiper with a long handle.

Important! When working at heights, adhere to safety regulations.

6. You can remove excess moisture with a scraper. To do this, draw a glass scraper at an angle of 20-30 degrees, moving from top to bottom, each time blocking the cleaned area.
7. Wipe the scraper dry with a clean cloth after each cleaning.

Important! If you do not have such a device, you can replace it with regular newspapers.

to contents ↑

How to wash the windows in the apartment? Care Features

To preserve the white color of the plastic and the correct operation of the mechanical part of the windows, pay attention to the following points:

• If in your double-glazed window there is an energy-saving spraying, do not be afraid to wash the glass. Spraying is applied to the inside of the glass.
• In the process of cleaning frames made of metal-plastic, clean the drainage holes, wipe the seals, and remove dust from the fittings. These are prerequisites for the further functionality of your products. Otherwise, you can wash the windows without streaks at home and they will look beautiful, but they will begin to let in cold air and form condensation. Such phenomena will not add cosiness to your home.
• For the window mechanisms to work properly, lubricate the metal elements with machine oil or special grease for metal-plastic products.
• To maintain the elasticity of the sealing gum in the winter, lubricate it with silicone grease.
• Make sure that the drainage holes are not clogged with dirt; condensation may form on the surface. In winter, precipitation freezes, which can damage the plastic.

to contents ↑

Helpful hints:

• In order to keep the window clean for a long period, you need to wipe it with a solution of vinegar. The smell from it will drive away flies and other insects that leave marks on the surface.
• To prevent the windows from freezing in the winter, prepare the following product: add 2 tablespoons of salt to a glass of water, stir and apply on glass.
• Cover minor cracks in the glass with colorless varnish, it will not allow the crack to grow and will be almost invisible on the surface.

Important! If the glass was filled with argon or other gas, it will have to be replaced to save energy.

• After washing the windows, wipe them with a mixture of water, glycerin and ammonia. From such a solution, a protective film forms on the surface, which will prolong the cleanliness of your window.
  to contents ↑

  Stock footage

Windows are the “eyes” of your home. Therefore, it is very important to monitor their cleanliness. Having familiarized yourself with useful information on how to wash windows without streaks at home, the cleaning process will take a little time. The effective methods described in the article will make washing metal products a pleasant and easy task.