The best convectors for heating

Electric heating systems are becoming increasingly popular. The reason for this is the high cost of solar and geothermal equipment, the complexity of its installation, the lack of gasification in some regions. The best convectors are electric, consumers are sure of this. Such a installation will cope with the heating of an apartment or a private house. Consider the types of convectors and popular models.

to contents ↑

Principle of operation

Convection is the process of conducting heat from a heated body. Heating of air occurs due to the hot surfaces of objects, then it rises up, and when cooled, it falls. To maintain the required air temperature, they use special devices - convectors. If placed rationally, the air will warm evenly.

Important! There are holes in the convector's metal casing: cold air enters the lower ones, and heated air masses exit through the upper ones. Inside is a heating element with a large area, due to which instant heating of the air occurs.

Installation of the device is recommended to be carried out in those places where cold air masses directly arise, that is, under the window sills. Therefore, the masses of cold air are neutralized by warm streams that rise up.

Important! The convector will not be effective in rooms with a high ceiling. In this case, the warm masses cannot reach the very top - they cool. Experts recommend using a combination of heating appliances and heating fans.

to contents ↑

Benefits

For heating any home are important:

  • Rapidity;
  • Uniformity;
  • Security.

What about the best convectors? Here are just a few reasons to buy such a device:

  • The most important thing is safety, and it is observed at such height in such equipment. Despite the presence of a heating element, the case does not heat up much, so this equipment can be used in almost any house and premises, including kindergartens and schools.
  • It is important that the device allows you to adjust the temperature when the required temperature is reached - it will temporarily turn off.
  • Of considerable importance is that the air after heating is not dry. Due to dryness, housing residents may suffer from respiratory failure, sore throat, and other adverse symptoms. The best electric heating convectors even moisturize the air masses.

Important! Convectors can be used in rooms with high humidity, they are not afraid of splashes and moisture.

We highlight the main advantages:

  • Ease of repair;
  • Lack of emission of harmful substances;
  • No dust accumulates inside;
  • Noiselessness;
  • The device copes with power surges;
  • There is no burning of oxygen and changes in the chemical composition of air;
  • Multistage protection system.

Important! Still can't find a heater for your home? We have prepared articles comparing different types of devices:

to contents ↑

Types of convectors

In order to figure out which heater is needed, we will determine the types of convectors. They may be:

  • Outdoor;
  • Wall mounted;
  • Recessed.

Floor convectors

Many consumers are sure that the most convenient and best electric convectors are floor-mounted:

  • Their main advantage lies in their mobility. If necessary, the device can be moved to any room.
  • Their main drawback is the power cord, but without it, the device will not work in any way. The cord is noticeable and can be an inconvenience if there are small children in the house.

Important! A good alternative to heaters is underfloor heating. You can find out the principle of action, advantages and other useful information on our portal in the article "Installation of infrared heat-insulated floors".

Wall convectors

The main advantage is the small thickness of the device. It is possible to install such a heater under the window - in this case, cold air will not enter the room. Thanks to the attractive design, such heaters remain invisible and do not spoil the general appearance of the room.

Important! A wall-mounted unit is not suitable for a room with a large area, since it will not cope with heating.

Built-in convectors

The ideal solution for a large room is the built-in baseboard convector:

  • The main advantage is that the device can be located on the floor in any part of the room.
  • The only inconvenience is considered that it is necessary to plan such a heating system during the construction process. Preparation of niches in the floor for the devices themselves, channels for the pipeline with a hot carrier is required.

to contents ↑

Model Overview

Convectors are widely marketed. Since such devices are in great demand, we will consider some models in more detail.

Noirot Spot E-3 1500

This model has the best price / quality ratio:

  • The best convectors for summer cottages are headed by this model, since it easily heats a room with an area of ​​up to 20 square meters.
  • The equipment includes an RX Silence PLUS heating element, the continuous service life of which is twenty-five years.
  • During operation of the device there is no burning of oxygen and changes in air humidity.
  • The element warms up in 75 seconds, and the room warms up after a quarter of an hour.
  • A high-precision electronic thermostat can significantly save energy.

Important! If voltage fluctuations occur, the device continues to work stably due to internal automation. If the power was suddenly turned off, the auto restart will start the unit after it has been supplied.

Stiebel Eltron CNS 100 S:

  • With the help of this electric wall convector it is possible to heat the room, the area of ​​which does not exceed 10 square meters.
  • It includes heating elements made of stainless steel and aluminum fins.
  • If the temperature in the room reaches +6 degrees, the device will automatically turn on.
  • If the device overheats, it will automatically turn off.
  • Design features allow convectors to be used in rooms with high humidity.

Important! Using a thermostat, the temperature is controlled to an accuracy of 1 degree.

Roda Standart 2.0 EBHA-2.0 / 230C2M

  • The rating of convectors would not be complete without this budget model.
  • With its help, a comfortable temperature will be maintained in a room whose area does not exceed 20 square meters.
  • Its equipment includes an innovative Double-U-Force tape heating element made of aluminum alloy.
  • With its help, heating will be effective and safe, while there is no heat loss.

Important! You can position the device on a wall or on the floor.

Additional benefits are presented:

  • Double insulated;
  • Built-in air ionizer;
  • Stepped power regulator;
  • Protection against overheating and overturning;
  • Auto restart function.
to contents ↑

Stock footage

As you can see, electric heaters are very diverse. Among the many models, you can choose the best option for any room. In addition, it is worth paying special attention to the safety of these devices.

1 star2 stars3 stars4 stars5 stars (No ratings yet)
Loading...

Report typo

Text to be sent to our editors:

Adblock detector

Wardrobe

Electronics

Wash